sdotlog

Yea I'm waiting for 800 bucks for a 350 I'm selling out of my 88 mc ls. Now I'm debating wheter I should sell the car also. I iinitially planed on doing an lt1 swap with it . Only 2 major things left on my imp. The fuel system and tranny.

The 42lb green ford injectors are on sale for 210 new. Any one with any experience with them?

sdotlog

Well heres a before video. Just remembered to get it before dropped off the car at the shop. Saved lots of money on the exhaust thanks to this forum. yea that air pump is rather annoying tho.
SHould have an after video of the le2 355 motor put in late this week or beginning of next week.

Yea the car is hella dirty, but hey the weather up here is screwed right now.

http://www.youtube.com/watch?v=ls19B5KSpCM

sdotlog

Here it is the LE2 Heads/Emissions cam 355 running very healthy.

http://www.youtube.com/watch?v=uVH44hiZZA8

myltwon

iTrader: (1)

good deal, def need to turn that idle down tho

sdotlog

Lol not a big techie, but how do i turn it down? seems like since i threw the tune on there it made it idle abit higher.
Also, when i shift out of park to drive the rpms bog down and up for a couple sec's then idles at around 850, same goes for when coming to a stop also.?

bombebomb

When you go to put the aftermarket injectors in, do not put the little metal clips on them they will not fit. Just bolt the fuel rail down and it will secure them.

ah, I see you already threw the engine etc in. Ignore my post haha.

sdotlog

So took the tune off, and car is idling back to normal. Now its on stock tune though. Im going to see if i can get an update thru email before i send the tuner back.

97Z28SS

iTrader: (5)

To me there's two ways to look at this as I'm in the same boat now as well I have a spare LT1 which I want to build a 383 with ported heads, 847 cam,1.6 rr's, Comp roller lifters, csi ewp, etc now if I spend the money now on a Scat 4340 forged crank, 6" pro comp rods and Manley or Mahle forged pistons and build a stout bottom end first and port the stock heads and intake myself I should get decent performance for now then when I have the money get Ai or LE heads. For me it's easier to swap out heads and cam then have to go back into the shortblock later to build a stroker, because if you take a 355 and 383 both with a h/c setup the 383 will make more hp/tq then the 355.

sweetbmxrider

iTrader: (13)

some good info in here, thanks