steve000

iTrader: (54)

First Up




Its a fresh start 355 out of 93 TA, lots of error codes

The engine was primed, then connected everything, had VATS disabled, and it will crank but no spark or fuel. Trying to get it to fire up for the first time

Thanks

RamAir95TA

iTrader: (2)

Um. What?

shbox

LOL, it's going to take a lot more pictures than that, but your IAT does look way off.

steve000

iTrader: (54)

IAT fixed

myltwon

iTrader: (1)

you're in open loop and you're idling at 25 rpm?

with that many errors are you sure the preferences are set for a 93?

shbox

The engine looks not even to be running.

For the OP- a snapshot of the log doesn't really help much. Something is in error in the logging for you to have that many items showing up.

RamAir95TA

iTrader: (2)

Green means good. If you were throwing DTCs, the cells would be red. In short, you're not setting ANY codes.

myltwon

iTrader: (1)

this is why I pay other people to tune

shbox

LOL, I guess it has been too long since I had Datamaster cranked up. Yeah, I notice now that is says "DTC OK" at the top!

litch2004

iTrader: (1)

does it stay in open loop or is it just cold start?

steve000

iTrader: (54)

Updated info, trying to fire engine for first time since rebuild

myltwon

iTrader: (1)

well if it won't fire a datalog won't say much then except that your car isn't running just like you probably figured out on your own

check plug wire connections to opti, valve lash, cam position, opti install, all main grounds, connection to coil, etc

kinglt-1

iTrader: (26)

It's kind of hard to data log without the engine running lol! first thing would be to check fuel pressure and spark.

allenwesley

i don’t know what all that means, but at the top right side i see a yellow box with a 1 in it and it says fuel enabled... i don’t know if that means anything but it struck me as odd...
and you askt everyone for help, and you didn’t specify if we had to know what we were looking at... haa jk

RamAir95TA

iTrader: (2)

You are better off actually telling us what is happening when you try to start the motor. Screenshots won't help whatsoever.