Help about to pull motor!!!
#82
TECH Fanatic
iTrader: (16)
I don't think it's the women that are bad, it's once you have kids....that ruins it all. My wife was fine with me working on the car, before we had kids. Once the girls came along, it's no more playing...keep it stock....yadda yadda yadda.
BTW Mike, Once you get this motor deal figured out, we'll get you down on your 60' time. It's only a few more parts and some fine tuning and we'll get you cutting 1.60's at least....if not into the 1.50's. (I got a few tricks up my sleeve, especially with a 60 out back )
BTW Mike, Once you get this motor deal figured out, we'll get you down on your 60' time. It's only a few more parts and some fine tuning and we'll get you cutting 1.60's at least....if not into the 1.50's. (I got a few tricks up my sleeve, especially with a 60 out back )
#87
Honestly for me.. when the bills are paid and the necessary **** is taken care of, I do what I want to do. I buy stuff for my girls car that she needs and take care of her to make sure everything with hers is good..in a way that is important to me so she can get to where she needs to like college and stuff, but I use my extra money on what I want.
#92
Just got off the phone with Red @ Comp Cams. They looked at my rockers, said yep it was fucked and are Sending me the High Tech SS rockers asap and they recomend that anyone with a similar application run the high tech SS rockers as well. Heres a link to the new rockers. These should be unbreakable and will handle 9k solid roller cams.
http://www.compperformancegroupstore..._Code=HiTechSS
http://www.compperformancegroupstore..._Code=HiTechSS
#94
Teching In
Join Date: Jul 2009
Location: Coventry, CT. 06238
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
tell you what pullin out the top is a bitch well pullin it out isnt difficult its dropping it back in you gonna need some wrecking bars 2x4s and friends to push lol well i was retarded and didnt take off the nose cover but i think that would help
#96
TECH Junkie
iTrader: (12)
Join Date: Sep 2007
Location: SFL
Posts: 3,011
Likes: 0
Received 0 Likes
on
0 Posts
Idk, I like the idea of dropping the entire drivetrain and being able to inspect it all at once, and not having to take headers off.. Another good thing about dropping the kmember is that it can be done with one person in much shorter time.. installation is tricky and may need a few people
#99
It was so far torn down it was easy to pop out the top, but its going back in through the bottom, so it can go in complete with the trans then just wire it up..
Comp told me to send in all my receipts when Im done and they will take a look at them and see what they can do.
Comp told me to send in all my receipts when Im done and they will take a look at them and see what they can do.
#100
TECH Senior Member
iTrader: (36)
It was so far torn down it was easy to pop out the top, but its going back in through the bottom, so it can go in complete with the trans then just wire it up..
Comp told me to send in all my receipts when Im done and they will take a look at them and see what they can do.
Comp told me to send in all my receipts when Im done and they will take a look at them and see what they can do.