gm 847 cam
#2
TECH Senior Member
iTrader: (36)
http://www.summitracing.com/search/?...12370847&dds=1
I also have one with 1000 miles on my shelf.
Trending Topics
#13
GM847 is originally the Crane PowerMax Cam (Part # 109841)
i believe its still available in summit ,,here is the link
http://www.summitracing.com/parts/CRN-109841/
i believe its still available in summit ,,here is the link
http://www.summitracing.com/parts/CRN-109841/
#14
I was wondering because I to have a used 847 cam with less than 100 miles that I'm thinking of swapping in my h/c/i engine that I'm going to swap into my new 94 m6 Z28. The engine currently has a custom comp 230/230 - .560/.560 110 lsa cam or I might hold the 847 for when I build my 383.
#17
TECH Addict
iTrader: (1)
^logic would dictate this
http://www.gmpartsdirect.com/results.html
search for p/n: 12370847
but I'd buy slp's, if you're gonna go off-the-shelf, might as well get a good deal on it
http://www.gmpartsdirect.com/results.html
search for p/n: 12370847
but I'd buy slp's, if you're gonna go off-the-shelf, might as well get a good deal on it
#18
I looked on Ai's website and they have a custom grind that is exactly the same as the 847 except it's on a 110 lsa instead of the 112 lsa of the 847 cam and for NOS the wider lsa will help with that so I'm going to use my 847 when I do my 383.
#19
thats a pretty healthy cam for a stock motor stock heads .. just throwing that out there.... whats the lift with 1.6s?
You will have to rev it well past redline to utilize it.
You will have to rev it well past redline to utilize it.