LE1.5 cam LE2 Head track results
#23
TECH Apprentice
Join Date: Dec 2004
Location: fort campbell
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my bauer cam (read speed-demon24's thread)finally killed my springs at around 5000 miles going to switch to the golds and try some link bar morels to help, my spider gave up the ghost!
#25
TECH Veteran
iTrader: (23)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
<<<<<<<<<<<Waiting for the Ai guys to flood the thread saying this isnt possible.
6000 rpm launch...THATS A MAN!!!!!!!!!
Good job man, some DA rears will make a world of difference.
Thats enough MPH for 11.40's
6k launch on some short tires with a 4.30 will kick you in the pants if it'll stick.
6000 rpm launch...THATS A MAN!!!!!!!!!
Good job man, some DA rears will make a world of difference.
Thats enough MPH for 11.40's
6k launch on some short tires with a 4.30 will kick you in the pants if it'll stick.
#30
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
#32
12 Second Club
iTrader: (7)
Join Date: Oct 2005
Location: NYC
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
awesome nice times. always like to see wen the lt1s break into the 11s as thats what im aiming for next time out.
i know you changed your opti but were you driving the car with the rotor screw which had fallen out prior to the change?
i know you changed your opti but were you driving the car with the rotor screw which had fallen out prior to the change?
#33
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah I went 12.65 with one screw hanging on lol, I couldn't tell at idle be it's a lopey cam but it dis smooth out a little with the new opti. It gave me a
mean vibration at 2k rpms too
mean vibration at 2k rpms too
#35
11 Second Club
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
<<<<<<<<<<<Waiting for the Ai guys to flood the thread saying this isnt possible.
6000 rpm launch...THATS A MAN!!!!!!!!!
Good job man, some DA rears will make a world of difference.
Thats enough MPH for 11.40's
6k launch on some short tires with a 4.30 will kick you in the pants if it'll stick.
6000 rpm launch...THATS A MAN!!!!!!!!!
Good job man, some DA rears will make a world of difference.
Thats enough MPH for 11.40's
6k launch on some short tires with a 4.30 will kick you in the pants if it'll stick.
#36
12 Second Club
iTrader: (7)
Join Date: Oct 2005
Location: NYC
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
so you had no idea that the opti was acting up until you took it out and opened it up? once it was changed you gained over .5 a second? just curious as this could be one thing to look at if my car doesnt run right.
#38
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, I mean at idle it's really hard to tell because the idle is supposed to be rough with the cam but I had a miss from 5k rpms and up and was only trapping 109 with the opti how it was
#40
TECH Fanatic
iTrader: (6)
Join Date: Nov 2007
Location: Carol Stream Il.
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very nice, and I'm sure you'll knock off quite a bit more with the new gears. Lets not talk about negative DA any more though, ok? It's a little depressing for the rest of us that never get to see such a thing.