GIZMO

iTrader: (8)

Mike, you don't have to cut-up the dash for a cage.



Fits well against the headliner too.



Make sure you tie into the suspension mounts and frame connectors if you want to get the most out of your cage/roll bar.

1995blacktattop

iTrader: (2)

yes i know this. i was being a smartass

duh

iTrader: (16)

^^^^ Now that's a work of art I'd like to strap into!!!

grn95t/a

iTrader: (10)

i belive ( been two or so years ago ) a high 10 at like 130? went through the traps and the damn thing turned right and rolled like 7-8 times.

Z-RATED94

iTrader: (6)

There you go Mike, have one done up like GIZMOs, you know you want to.

robsquikz28

iTrader: (246)

that is one sexy *** cage :d im so jealous

AChotrod

iTrader: (17)

Thanks for all the great advice! For some reason I couldnt get the site to come up the last few days?
Im going to use this car, and Im looking into local chassis shops to do the work. 6point 8 or even 10pt is what im thinking about now. I have No intentions stopping the mods anytime soon and the cage is basically the last thing to do to the chassis. Then its onto HP and possibly a th400/350.
Funny thing is this car was bone stock 1 1/2 yrs ago.

AChotrod

iTrader: (17)

I saw Gizmo's car in person last yr. Its bad to the bone and what I would like to end up with. Great guy to pit next to also!!

James Montigny

iTrader: (13)

Slippery slope LOL

I told you heads/cam are a gateway drug

BADHAWK51

iTrader: (1)

Gizmo has a well thought out car. This could be you Mike.

AChotrod

iTrader: (17)

I hope so!!!! I could die happy with a wheels up launch like that!!

GIZMO

iTrader: (8)

This is still my favorite! (I just wish it was high res)

GIZMO

iTrader: (8)

Mike,

On the roll bar/cage, tie it into the suspension properly and it will reap big rewards. Forget bolt-in or over the seats. Bend all plates to conform to the floor, etc. Every little detail counts. PM me or call me any time.

Daren