Small, Stupid and Annoying!
Small, Stupid and Annoying! this almost seems ridiculous to be posting up here but its driving me nuts! its the roller for my drivers side door. its completely worn gone and its very hard to open and close the door... it keeps on 'locking' and is not fun. does anyone have a part number for this little bugger ? or a place where i can buy it from ? thanks
i greased it all the time. when igot the car it was already f#cked. it had afew flat spots in it. im a machinist so i guess ill be playing around with it this weekend lol maybe ill make afew extra's for anyone that wants to replace theres
Trending Topics
It looks like you could grind down the top of the shaft that the worn-out piece rotates on, then slid it off the top. the make/find a new piece, install it, and weld (or JB-weld) something small on top (washer ?) so it doesn't come off the top of the shaft.
Or you could just remove the spring.
Or you could just remove the spring.
Last edited by 99Bluz28; Feb 8, 2010 at 06:33 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
tryed rock auto couldnt find anything.
as far as removing it. i havent given it to much thought. i think its a regular door pin that might pop out. if not as stated above ill probably cut the head off and weld a small washer to the top. no biggie either which way tho. i just finished removing my engine harness so i have other things that take priority right now lol ill update this when i get around to it tho. thanks for the replys guys
as far as removing it. i havent given it to much thought. i think its a regular door pin that might pop out. if not as stated above ill probably cut the head off and weld a small washer to the top. no biggie either which way tho. i just finished removing my engine harness so i have other things that take priority right now lol ill update this when i get around to it tho. thanks for the replys guys