Ceramic coated headers VS Stainless headers????
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Dec 2009
Location: Southern California
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Ceramic coated headers VS Stainless headers????
Ok Im about to inverst in some Longtubes and was wondering what the advantages were if any in having ceramic coated headers. I love the look of stainless headers but and worried that the underhood temps would be too high? Does the ceramic coat aid that much im lowering temps? I live in California so rust is not an issue, please help me decide, also who makes stainless headers?
#5
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: limbo
Posts: 2,123
Likes: 0
Received 0 Likes
on
0 Posts
will ceramic coating stick to the stainless if you wanted to get them coated?
you could always wrap the stainless OP, it will look like **** but they'll knock down temps and last forever
you could always wrap the stainless OP, it will look like **** but they'll knock down temps and last forever
Trending Topics
#10
TECH Veteran
iTrader: (12)
I have the LPP stainless headers and I will ASSUME that they can cause slightly hotter under hood temps solely based on Jet Hot coating's marketing claims and nothing more. But can anyone really prove this and show temperature differences for both applications? Is it 20 degrees? Is it 50 degrees? Higher?
Even if my under hood temps are higher, I can not detect any negative impacts as a result of such. I have never melted plug wires, boots, air boxes or any other component due to higher header heat. I have a CAI so header heat is not going to negatively impact intake air temps either. When I raise the hood, I dont get knocked down down by what appears to be, hotter than normal temps
Considering that the stainless will last forever I don't see the point of having them coated other than to say they will maintain that consistent silver finish as opposed to the natural stainless finish that tends to range from blue to gold depending on what gets the most heat.
Even if my under hood temps are higher, I can not detect any negative impacts as a result of such. I have never melted plug wires, boots, air boxes or any other component due to higher header heat. I have a CAI so header heat is not going to negatively impact intake air temps either. When I raise the hood, I dont get knocked down down by what appears to be, hotter than normal temps
Considering that the stainless will last forever I don't see the point of having them coated other than to say they will maintain that consistent silver finish as opposed to the natural stainless finish that tends to range from blue to gold depending on what gets the most heat.
#11
TECH Fanatic
The ceramic coating supposedly keeps the heat from exhaust gases isolated in the primary, which aids in scavenging. That's the primary benefit of ceramic coating as far as I understand. How much that might be worth from a performance standpoint, I really have no idea. I believe I could tell a difference in underhood temps in comparison to the cast iron manifolds.
#12
FormerVendor
Join Date: Mar 2010
Location: North Carolina, Oklahoma, and Arizona
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
I have the LPP stainless headers and I will ASSUME that they can cause slightly hotter under hood temps solely based on Jet Hot coating's marketing claims and nothing more. But can anyone really prove this and show temperature differences for both applications? Is it 20 degrees? Is it 50 degrees? Higher?
Even if my under hood temps are higher, I can not detect any negative impacts as a result of such. I have never melted plug wires, boots, air boxes or any other component due to higher header heat. I have a CAI so header heat is not going to negatively impact intake air temps either. When I raise the hood, I dont get knocked down down by what appears to be, hotter than normal temps
Considering that the stainless will last forever I don't see the point of having them coated other than to say they will maintain that consistent silver finish as opposed to the natural stainless finish that tends to range from blue to gold depending on what gets the most heat.
Even if my under hood temps are higher, I can not detect any negative impacts as a result of such. I have never melted plug wires, boots, air boxes or any other component due to higher header heat. I have a CAI so header heat is not going to negatively impact intake air temps either. When I raise the hood, I dont get knocked down down by what appears to be, hotter than normal temps
Considering that the stainless will last forever I don't see the point of having them coated other than to say they will maintain that consistent silver finish as opposed to the natural stainless finish that tends to range from blue to gold depending on what gets the most heat.
Coatings will tend to reduce surface temps up to 400°, although it all depends on your set up as everything comes into play when dealing with exhaust gas temps. On average we see around 300° to 350° reduction, although again sometimes more sometimes less. It’s not always about the heat reduction though! Everything that we do is coated inside and out 100%, this being done will almost eliminate the turbulence in the exhaust gas coupled with the thermal retention and even dissipation of heat will allow your exhaust to move out much quicker, allowing your engine to work less and produce more power. We are race proven and have been testing and creating for over 30years.
#13
12 Second Club
iTrader: (129)
Between what I've seen with my own ceramic coated headers and those of friends, I have come to have the opinion that ceramic is junk. If I am in the market for headers and can't afford stainless, I will get regular painted headers. Why? Because the ceramic doesn't last.
#14
Teching In
Join Date: Nov 2009
Location: Mid-Michigan
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I'll jump in here with a positive.
I've been running Jet-Hot coated Edelbrock mid-lengths on my '95 Sierra since '01. The first thing I noticed was a dramatic decrease in under hood temps from the stock manifolds. The second thing I have seen is they still look brand new! I can say that ceramic does last, no worries here.
Mark
I've been running Jet-Hot coated Edelbrock mid-lengths on my '95 Sierra since '01. The first thing I noticed was a dramatic decrease in under hood temps from the stock manifolds. The second thing I have seen is they still look brand new! I can say that ceramic does last, no worries here.
Mark
#15
12 Second Club
iTrader: (129)
My ceramic coating lasted 2 years on my Jet Hot LT headers before the collectors were very rusty. I sent them in shortly before my warranty was up on the coating and when I got them back they looked great. Well then they only lasted about 3 months before looking like they did before. They were driven in rainy weather but never in snow or salt.
#18
FormerVendor
Join Date: Mar 2010
Location: North Carolina, Oklahoma, and Arizona
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
I know many that have done this and seen no issues and MANY more that have and had MAJOR issues. The wrap will cause the metal to fatigue MUCH MUCH faster and will open the door to cracks when dealing with stainless. IF you are dealing with cast iron, or mild steel the issues are far worse. I ALWAYS recommend one or the other but never both!