Put coilovers on the LT1 yesterday...
#29
TECH Fanatic
Thread Starter
iTrader: (6)
Join Date: Aug 2006
Location: Charleston, S.C.
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks again guys! I might be doing a black and white shoot with the g/f and the car here soon. I will also have a coil or two removed from the rear before then.
#33
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
A few weeks ago I did this install too, out back is the 1.3inch drop from Eibach.
Matt is a pain in the *** turning it with a spanner isn't it, I know it is for me anyways.
Matt is a pain in the *** turning it with a spanner isn't it, I know it is for me anyways.
#37
TECH Veteran
iTrader: (246)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That stance looks sick as hell Matt. You should measure the fronts from the ground to the fender going from the center of the wheel and measure 21.5". That will be a good starting point for drag racing. Other wise leave it where you want and then when you mash the gas your front end will sky high> lol.