words of advice!!!
#21
On The Tree
Thread Starter
Join Date: Oct 2009
Location: West Lafayette In
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
i will post up what she puts down when i get back tom... its at 12 in Cincinnati.. i should be back up here around 3-4 ish.. i hope i wasnt too far off my estimate... the car has been running badly lately and im hoping that the tune really wakes her up..
#23
On The Tree
Thread Starter
Join Date: Oct 2009
Location: West Lafayette In
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
i think i will just go with the street tune... i may or may not get the dyno tune after... i have till tom to decide...unless somebody says right now... DONT GET A DYNO TUNE.. SAVE YOUR MONEY!!!
#24
TECH Fanatic
I'm not really the person to be asking, but with your mods I would probably just go with a mail order tune.
#26
On The Tree
Thread Starter
Join Date: Oct 2009
Location: West Lafayette In
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
any pro's want to chime in?.. its killing me on if i should spend the big bucks and squeeze just a lil more power.. or will i be good with a street tune?.. and i know mail order tunes are good... but what would that yield roughly to a street tune power wise?..
#27
11 Second Club
iTrader: (35)
I wouldn't waste the time or money on a dyno tune right now. Especially considering you will probaly mod the car further in the future you would be throwing money away. I would go ahead and get a mailorder tune from say Pcmforless or MadTuner which will be alot cheaper and should be pretty damn close to being as good as a dyno tune will be with a bolt-on car. They have both probaly dyno tuned hundreds upon hundreds of bolt-on LT1's so them being able to perform a mailorder tune that is precise for your mods is extremely likely. Even cam-only you can get away with a mailoder tune being virtually spot on assuming you go with a common cam.
BTW ~300rwhp is about average for a full bolt-on M6 LT1. I have had my car on different dynojets that have been up to 10rwhp off from one another without making any changes to the car. I have also made pulls that have thrown some radical numbers, dynos are simply a tuning tool nothing but. Tuners have the ability to calibrate dynos so they throw generous numbers, some dynos are simply not calibrated correctly, etc. etc. I would expect you to realistically have between 295-305rwhp with your current mods on a dynojet.
BTW ~300rwhp is about average for a full bolt-on M6 LT1. I have had my car on different dynojets that have been up to 10rwhp off from one another without making any changes to the car. I have also made pulls that have thrown some radical numbers, dynos are simply a tuning tool nothing but. Tuners have the ability to calibrate dynos so they throw generous numbers, some dynos are simply not calibrated correctly, etc. etc. I would expect you to realistically have between 295-305rwhp with your current mods on a dynojet.
#29
11 Second Club
iTrader: (35)
For example...A buddy of mine has a full bolt-on LS1 that got dyno tuned by a popular LS shop on this board. My other buddy with HPTuners (LS1 tuning software) uploaded the tune from our other friends car and runs that on his full bolt-on LS1. Car runs mint, we have datalogged it, raced it, you name it and the tune is really spot on. That is exactly what the tuners do with a mailorder tune so with such a popular setup you can be sure to have a mailorder that should work really well for you all while saving you some dough over that $400 dyno tune.
#31
TECH Senior Member
iTrader: (2)
But if you don't have the hardware, it will take a week or so to get a PCM from the tuner, depending on who you use.
I will agree with StealthFormula - it's not worth it at this stage of your game.
#37
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: limbo
Posts: 2,123
Likes: 0
Received 0 Likes
on
0 Posts
even with the engine running good I would still opt for a mail order personally just because you don't have a whole lot done. yeah a dyno tune would be more accurate but what happens when you get a few more mods and need a re-tune? another $400? a mail order re-tune is only $50-75 I forget which. so I'd send it to Ion(madtuner) personally.
#38
On The Tree
Thread Starter
Join Date: Oct 2009
Location: West Lafayette In
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
hey thanks guys... the car was bone stock down to the original tires that came with the car...my neighbor had the car before me.. i never saw the car out really.. i picked it up with around 50k on the clock in 2005... I was the first to mod anything.. and i wouldnt say the car is running like crap.. but does have some kind of problem with throwing codes...turning both fans on high and my ses light coming on within 5min of running all at the same time.. ive tryed to figure out what it was but i still have not found an exact problem... any clues without the codes that would cause that?... the car used to chirp 4th when i grabbed it.. now it cant.. i was hoping while i was getting the dyno tune it would be able to pull the codes.. im assuming im wrong? lol
#39
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: limbo
Posts: 2,123
Likes: 0
Received 0 Likes
on
0 Posts
hey thanks guys... the car was bone stock down to the original tires that came with the car...my neighbor had the car before me.. i never saw the car out really.. i picked it up with around 50k on the clock in 2005... I was the first to mod anything.. and i wouldnt say the car is running like crap.. but does have some kind of problem with throwing codes...turning both fans on high and my ses light coming on within 5min of running all at the same time.. ive tryed to figure out what it was but i still have not found an exact problem... any clues without the codes that would cause that?... the car used to chirp 4th when i grabbed it.. now it cant.. i was hoping while i was getting the dyno tune it would be able to pull the codes.. im assuming im wrong? lol
#40
On The Tree
Thread Starter
Join Date: Oct 2009
Location: West Lafayette In
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Auto zone can't check the obd1 and the paperclip method doesn't work.. I've got the hook up and some software that I can hook up to the lap top.. I just don't know how to use it.. This summer I will sit down and work on it..