Sleeper LT1 - best set up?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What or who has the best sleeper LT1 set up? I’m talking about a better than LS performing LT1, with no obvious outward indications that it’s been upgraded. Obviously a catback is going to be a part of any setup so that can be one exception. Stuff like upgraded brakes are okay so long as they work with the stock wheels and don’t scream upgrade. I’ve got more money than time (but not a bunch of either) and for the last two years I’ve thought about going the with the $10k 350 Lingenfelter build, especially since they have a good warranty and I’m looking for a good balance between reliability and upgraded performance.
Why do this? Because I like the looks of a clean, stock LT1, I like the looks of the LT1 a LOT better than the LS1, my current LT1 is paid for, has low miles and I’ve already done a few non-visible upgrades, and I don’t like the new Camaro (plus we’re talking about $10k versus $30k). Notice that I didn’t mention any numbers (1/4, 0-60) since I’m just thinking about performance close to a current Camaro.
Why do this? Because I like the looks of a clean, stock LT1, I like the looks of the LT1 a LOT better than the LS1, my current LT1 is paid for, has low miles and I’ve already done a few non-visible upgrades, and I don’t like the new Camaro (plus we’re talking about $10k versus $30k). Notice that I didn’t mention any numbers (1/4, 0-60) since I’m just thinking about performance close to a current Camaro.
#2
TECH Senior Member
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Better than LS performing? LMAO sounds like you have a LOT of research to do.
WTF exactly are you trying to accomplish.
You realize there's everything from 15 second ls1's to 7 second ls1's dont you?
Are you asking what will make it beat a stock ls1?
Bolt ons and a tune.
If you're asking anything more than that, the question is so subjective it cant possibly be answered without more info.
Here's the order of progression for most people.
Bolt ons
cam or
cam and heads
power adder
That's it. There's ALWAYS gonna be something faster, but HONESTLY I rarely run across an ls powered vehicle that I cant dispatch fairly easily with my car and it's cam only. Really pisses them off too. Then if I need it I have a bottle on top of that. Usually dont but for some ls cars I do. and some ls cars would still hand me my ***. Just like there are tons of LT cars that would hand me my ***..
WTF exactly are you trying to accomplish.
You realize there's everything from 15 second ls1's to 7 second ls1's dont you?
Are you asking what will make it beat a stock ls1?
Bolt ons and a tune.
If you're asking anything more than that, the question is so subjective it cant possibly be answered without more info.
Here's the order of progression for most people.
Bolt ons
cam or
cam and heads
power adder
That's it. There's ALWAYS gonna be something faster, but HONESTLY I rarely run across an ls powered vehicle that I cant dispatch fairly easily with my car and it's cam only. Really pisses them off too. Then if I need it I have a bottle on top of that. Usually dont but for some ls cars I do. and some ls cars would still hand me my ***. Just like there are tons of LT cars that would hand me my ***..
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
gregrob:
Yep, I know it's a fairly broad question. I also know it doesn't take much to get to LS1 performance, but I'm looking for a little better than that. Close to, but doesn't have to beat, LS2 - LS3 power, but again, the key is sleeper status with decent reliability. That's why the Lingenfelter looks like a good deal.
Having said all of that, I just checked and C5 Vettes are running close to $20k in my area, but like I stated, I'd like the idea of a stealth, stock-looking LT1.
Yep, I know it's a fairly broad question. I also know it doesn't take much to get to LS1 performance, but I'm looking for a little better than that. Close to, but doesn't have to beat, LS2 - LS3 power, but again, the key is sleeper status with decent reliability. That's why the Lingenfelter looks like a good deal.
Having said all of that, I just checked and C5 Vettes are running close to $20k in my area, but like I stated, I'd like the idea of a stealth, stock-looking LT1.
#4
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: limbo
Posts: 2,123
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
OP- FYI: most of that $10k price tag is for the name, u could spend less and get more from some of the engine builders on here
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The hardest part of this again is keeping it pretty much looking stock. No electric water pump, oversize valve covers, stuff like that.
#7
Teching In
Join Date: Apr 2009
Location: Wilmington NC
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Teching In
Join Date: Apr 2009
Location: Wilmington NC
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
im just messin with you man. if your going for "sleeper" something with loud exhaust, and an aggressive cam, is not a sleeper. throw some gears in it, bolt ons, spray it with a tune.
all stuff that can be done without anyone knowing, no one can make you pop your hood if thats what your worried about it, and wire loom your nitrous
all stuff that can be done without anyone knowing, no one can make you pop your hood if thats what your worried about it, and wire loom your nitrous
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
id say something like a le1 set up with a small cam would be the way to go. you got to think the new ls3 puts out 430 hp. they dyno a around 360-370 rwhp.
so if you can get that out of the car and have a weight advantage which you will then you should be good to go. the le1 set up is going to get you the closest with out giving it away to much. At least it seems that way on paper. more experienced people could probably chime in.
so if you can get that out of the car and have a weight advantage which you will then you should be good to go. the le1 set up is going to get you the closest with out giving it away to much. At least it seems that way on paper. more experienced people could probably chime in.
#12
11 Second Club
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well those who know me know that I'm a big fan and long term test dummy for Lingenfelter. I have one of their 383 packages built in 1995 and it still screams. The package, while a bit pricey, includes top end parts and and even more top end install and attention to detail. The cam they use in their 383 packages is a weenie 211/219 .533/.560 lift emissions legal design and idles almost like a stocker. I since switched to a slightly more aggressive yet still weenie custom from Erson, but you get the idea. With my original unmolested LPE 383 kit, stock wheels with DRs, 3.73s and a Vig 3600 it ran high 11s all day at 115-117 mph and looked stock except for the headers, cat back, and LPE cold air kit. And you could and still can, drive it anywhere. Folks used to walk right passed my car at shows, the track, etc...It wasn't until the board lit up at the big end of the track did people even give it a second look..
Either package is a good idea, but I'm partial to the 383 because a properly built 383 will slide the powerband down a few hundred rpm and consequently you wont need to spin the thing to the moon to make power...My hp and tq curves are very flat with lots of area under the curves...
--Alan
Either package is a good idea, but I'm partial to the 383 because a properly built 383 will slide the powerband down a few hundred rpm and consequently you wont need to spin the thing to the moon to make power...My hp and tq curves are very flat with lots of area under the curves...
--Alan
#13
TECH Fanatic
iTrader: (2)
Join Date: Aug 2007
Location: Rhode Island
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my car is definitely a sleeper, its got a bone stock interior and exterior with salad shooters and a v6 style catback w/ a large magnaflow muffler. its a mild 396 and is really fast. cams a 236/244 112 so it has some lump but honestly the motor is louder then the exhaust. you can hear the valvetrain and the fans when i pull up to a place, but ive seen some friends after i bought the car and got "was that rob in that junk v6 camaro?" haha
#17
TECH Enthusiast
Join Date: Sep 2008
Location: Watertown, WI
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
A buddy of mine had longtubes with ory and the 4" mufflex exhaust. Sounds pretty tame even with an lt4 hot cam. The LT4 hot cam is probably the tamest sounding aftermarket cam you can get. Honestly, until he revs it, it's almost unnoticeable. Besides that, the person who said bolt-ons and spray couldn't be more right, haha.
#19
Village Troll ![](http://jameskellock.tripod.com/sitebuildercontent/sitebuilderpictures/rsman.jpg)
![](http://jameskellock.tripod.com/sitebuildercontent/sitebuilderpictures/rsman.jpg)
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very nice package with quality parts. I have the LT4 CNC heads/intake and ran the 211/219 cam for 70,000 miles. That cam is extremely tame. You will not notice any lope if you run cats and will barely notice any if running ORY. Car dynoed 370/350 with Hooker LT's/ORY and 12-bolt. Ran a best of 12.09 @ 115.5 in a 3750lb car on ET Streets on 16" '97 wheels. I pissed off a lot of people with that setup. Great fun. Now my LPE heads/inake are on my 396 solid roller, without any extra port work and support power up to 6800rpm.
#20
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: limbo
Posts: 2,123
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
A buddy of mine had longtubes with ory and the 4" mufflex exhaust. Sounds pretty tame even with an lt4 hot cam. The LT4 hot cam is probably the tamest sounding aftermarket cam you can get. Honestly, until he revs it, it's almost unnoticeable. Besides that, the person who said bolt-ons and spray couldn't be more right, haha.