Signal light problem :/
Signal light problem :/ Hey I got a 96 Z28 Auto.
and for some reason today my signalers are not working right. When I signal they just stay on, they do not flash on off on off, they just stay on exactly like if they were headlights
. But when I put on my hazards on, they do flash on off on off.
What could cause this and is it an easy fix?
Thanks,
Kag
and for some reason today my signalers are not working right. When I signal they just stay on, they do not flash on off on off, they just stay on exactly like if they were headlights
. But when I put on my hazards on, they do flash on off on off. What could cause this and is it an easy fix?
Thanks,
Kag
Last edited by kaganader; Jul 7, 2010 at 11:26 PM.
Hmm well they all (front and rear) light up when signalling but don't blink and they all flash when I put on the hazards. They seem to work normally, none of them are out.
Was one of your bulbs broken/dead, and did it affect both your left and right turning signals?
Was one of your bulbs broken/dead, and did it affect both your left and right turning signals?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Same thing happened to me. I replaced the flasher and all the bulbs, and that did not fix the problem. It ended up being the ground connection in the front sockets. Go to the parts store and buy two new pigtails, cut your old ones off, crimp the new ones on. I would almost bet money that will fix your problem.
LOL i had this happen before and swore up and down that all my bulbs were fine. I used to manually click my turn signal up and down. I tried the flasher and that didnt fix it. The bulb was bad, i replaced it and all was fine.
I am too. I am having a problem with my right side signal. When I flip it on one bulb goes out and the other goes bright, and on the left side they both go bright. I've tried all new bulbs, but I was wondering if the flasher could have anything to do with it.
Sorry for the thread jack! haha
Sorry for the thread jack! haha
I am too. I am having a problem with my right side signal. When I flip it on one bulb goes out and the other goes bright, and on the left side they both go bright. I've tried all new bulbs, but I was wondering if the flasher could have anything to do with it.
Sorry for the thread jack! haha
Sorry for the thread jack! haha
From what you describe, I'd try the flasher, first. A lot easier than changing all the bulbs.
Now what would I need to do to the turn signal flasher to get it working.
TECH Veteran
Joined: Dec 2008
Posts: 4,146
Likes: 62
From: Little Rock, AR
What you do mean what do you do with it? You replace it.