speed daddy headers
Email the seller and see what they say. Fact is SSAutochrome was the one who made the headers for LPP, and (from what it looks like) a bunch of other eBay vendors too. 
The set I installed a few weeks ago certainly felt like 1 7/8". I didn't mic them though.
Out of curiosity, where did you read that at?
The set I installed a few weeks ago certainly felt like 1 7/8". I didn't mic them though.
Out of curiosity, where did you read that at?
TECH Enthusiast
Joined: Dec 2009
Posts: 529
Likes: 0
they are 1 5/8 stepped to 1 3/4..
a friend just put a set on he bought from speed daddy i believe, well, i know he got them off ebay, and they were like $312 or $320 delivered.. i stopped by his house today and we were looking at them..
i talked to him today about them, he said they went on pretty easy, think he said he had to loosen up his steering column and slide it over as far as he could and had plenty of clearance for the steering shaft.. he also said he had to do some adjusting on the y-pipe, and trimmed a little off the weld seam on the k-member on the passenger side.. think that was more from him having old stock engine mounts more than anything..
he said he would definetly buy another set for what they cost..
a friend just put a set on he bought from speed daddy i believe, well, i know he got them off ebay, and they were like $312 or $320 delivered.. i stopped by his house today and we were looking at them..
i talked to him today about them, he said they went on pretty easy, think he said he had to loosen up his steering column and slide it over as far as he could and had plenty of clearance for the steering shaft.. he also said he had to do some adjusting on the y-pipe, and trimmed a little off the weld seam on the k-member on the passenger side.. think that was more from him having old stock engine mounts more than anything..
he said he would definetly buy another set for what they cost..
Email the seller and see what they say. Fact is SSAutochrome was the one who made the headers for LPP, and (from what it looks like) a bunch of other eBay vendors too.
The set I installed a few weeks ago certainly felt like 1 7/8". I didn't mic them though.
Out of curiosity, where did you read that at?
The set I installed a few weeks ago certainly felt like 1 7/8". I didn't mic them though.
Out of curiosity, where did you read that at?
http://www.camaroz28.com/forums/show....php?p=6347054
Registered User
Joined: Oct 2011
Posts: 1
Likes: 0
Speed daddy ls1 headers I currently have installed these headers on my 98 a4 convertible and have had no problems they are 1 3/4 and 3 in out. So far no exhaust leak, only problem i came across with them are i had to remove the steering column to fit them. for the price i would def buy another pair.
Trending Topics
Guys there's a huge thread on here about this. ..Assumptions like the post from brucer are what causes the confusion.
Speed Daddy's are 1 7/8
There were / are some other sellers on eBay selling a set with 1 5/8 primaries. All the info is in the thread. Look up Colin91Zs posts
Speed Daddy's are 1 7/8
There were / are some other sellers on eBay selling a set with 1 5/8 primaries. All the info is in the thread. Look up Colin91Zs posts
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Launching!
Joined: Jul 2011
Posts: 286
Likes: 0
From: Horn Lake, MS
I currently have installed these headers on my 98 a4 convertible and have had no problems they are 1 3/4 and 3 in out. So far no exhaust leak, only problem i came across with them are i had to remove the steering column to fit them. for the price i would def buy another pair.
Teching In
Joined: Oct 2010
Posts: 22
Likes: 0
From: Cedar Park
There good headers got them on my 01z28 but look at pictures before buying them and you will see the air ports on the headers are not facing the correct direction had to do a lil southern fabrication to make them work and the steering knuckle rubs a lil. Taking it to gm here in my lil country town I know the shop foreman grew up with him. Im gunna see if he can turn that egr off. For a lil extra money get u some kooks or even pacesetters they bolt right up with no problem. Still cant beat the price on speed daddy.
Last edited by 01Z28smith; Mar 20, 2012 at 06:22 AM.
