IM Thinking about a 800+HP LT1 turbo build
#66
10 Second Club
iTrader: (26)
https://ls1tech.com/forums/small-blo...let-truck.html
that's a badass BBC!!!!!! dual plane intake!!!!!!!!
GTFO
that's a badass BBC!!!!!! dual plane intake!!!!!!!!
GTFO
#68
TECH Fanatic
iTrader: (6)
Join Date: Sep 2008
Location: DSM
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
Stay on topic please! Quit the "my dick is bigger than your's" argument. Although I must admit a 12.2 is horrible for a SR396... My buddy did that with an lt4 hotcammed unbalanced 355 with untouched cylinder heads.... (believe it or not)
OP, Turbo build will be expensive. You need to decide if you want to drop all your money on that. Talk to some engine builders and they will tell you how much it will be and will recommend parts. Then you can post back in here and experienced guys can recommend you where else to go
OP, Turbo build will be expensive. You need to decide if you want to drop all your money on that. Talk to some engine builders and they will tell you how much it will be and will recommend parts. Then you can post back in here and experienced guys can recommend you where else to go
#69
TECH Veteran
iTrader: (23)
Stay on topic please! Quit the "my dick is bigger than your's" argument. Although I must admit a 12.2 is horrible for a SR396... My buddy did that with an lt4 hotcammed unbalanced 355 with untouched cylinder heads.... (believe it or not)
OP, Turbo build will be expensive. You need to decide if you want to drop all your money on that. Talk to some engine builders and they will tell you how much it will be and will recommend parts. Then you can post back in here and experienced guys can recommend you where else to go
OP, Turbo build will be expensive. You need to decide if you want to drop all your money on that. Talk to some engine builders and they will tell you how much it will be and will recommend parts. Then you can post back in here and experienced guys can recommend you where else to go
#71
11 Second Club
iTrader: (6)
Stay on topic please! Quit the "my dick is bigger than your's" argument. Although I must admit a 12.2 is horrible for a SR396... My buddy did that with an lt4 hotcammed unbalanced 355 with untouched cylinder heads.... (believe it or not)
OP, Turbo build will be expensive. You need to decide if you want to drop all your money on that. Talk to some engine builders and they will tell you how much it will be and will recommend parts. Then you can post back in here and experienced guys can recommend you where else to go
OP, Turbo build will be expensive. You need to decide if you want to drop all your money on that. Talk to some engine builders and they will tell you how much it will be and will recommend parts. Then you can post back in here and experienced guys can recommend you where else to go
#73
TECH Veteran
iTrader: (23)
Ok enough BS, back on track
Op you can get that kinda power with a 76mm but its harder, a 88mm is the ticket.
Forged 4340 4 bolt bottom end, ported stock heads and intake and a 88mm should get you there.
Look in the classified section, there is a white 6 speed Trans Am in there that 80% done for CHEEEEAP.
Op you can get that kinda power with a 76mm but its harder, a 88mm is the ticket.
Forged 4340 4 bolt bottom end, ported stock heads and intake and a 88mm should get you there.
Look in the classified section, there is a white 6 speed Trans Am in there that 80% done for CHEEEEAP.
#74
TECH Fanatic
iTrader: (6)
Join Date: Sep 2008
Location: DSM
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
A competent builder would also recommend good top-end, cam setup etc.
When I was considering turbo'in my LT1 I talked to Lloyd Elliott and OutlawZ and they spent a good amount of time pointing me in a good direction and I was only in the talking stages
When I was considering turbo'in my LT1 I talked to Lloyd Elliott and OutlawZ and they spent a good amount of time pointing me in a good direction and I was only in the talking stages
#75
TECH Veteran
iTrader: (23)
I would do it ALL over again, this car is SO much fun.
Thanks again.
#78
https://ls1tech.com/forums/small-blo...let-truck.html
that's a badass BBC!!!!!! dual plane intake!!!!!!!!
GTFO
that's a badass BBC!!!!!! dual plane intake!!!!!!!!
GTFO
yep its just an old holley contender dual plane, idle to 7000rpm... and a holley pro shop 950dbl pumper. engines been together for about 15yrs..
about as old as you are
#80
i have a bigshot kit on it. those pics are probably about 8-10yrs old.. trucks dissasembled getting bodywork and paint. swapping to a stepside bed, lowered it about an 1 1/2 lower in the front and 2 inches lower in the rear and added an 8point cage.. ..