the "ROLLER"
the "ROLLER" well i figure since i have had this car almost a year figured i would post a little progress..
I havent taken too many pictures but will now as it gets going together..
when i got it. still on the trailer
finally got it in the garage after a week..
Inside def. needed some cleaning..
the motor..
This is a pic that i took of it today.. when i got it the car was pretty well stripped.. its almost back together just needs the drive train dropped in and a few things buttoned up.. looking forward to it.. will be posting more pics along the way
just for ***** and giggles my old jeep a few of you know.. i found this in my photobucket account lol
mods are as follows:
stock shortblock rebuilt with arp rodbolts and total seal rings
cc306 cam
flotech stage 3 ported heads
arp headbolts
crane 10308 spring kit
1.6 nsa rockers
pacesetter long tubes
tsp offroady
flowtech cutout
dynomax bullet muffler dumped at the axle
pro 5.0 shifter
new stock clutch(will be replaced soon money was tight)
walboro 255 fuel pump
sportlines (not on the car)
Deleted:
A/c
abs
cruise
rear seats
I havent taken too many pictures but will now as it gets going together..
when i got it. still on the trailer
finally got it in the garage after a week..
Inside def. needed some cleaning..
the motor..
This is a pic that i took of it today.. when i got it the car was pretty well stripped.. its almost back together just needs the drive train dropped in and a few things buttoned up.. looking forward to it.. will be posting more pics along the way
just for ***** and giggles my old jeep a few of you know.. i found this in my photobucket account lol
mods are as follows:
stock shortblock rebuilt with arp rodbolts and total seal rings
cc306 cam
flotech stage 3 ported heads
arp headbolts
crane 10308 spring kit
1.6 nsa rockers
pacesetter long tubes
tsp offroady
flowtech cutout
dynomax bullet muffler dumped at the axle
pro 5.0 shifter
new stock clutch(will be replaced soon money was tight)
walboro 255 fuel pump
sportlines (not on the car)
Deleted:
A/c
abs
cruise
rear seats
That would prob help lol. its gna have a t56 with a few upgrades in it new synchros and a few other things.. havent got that back yet.. rearend is a ten bolt for now will be upgrading to a 9 inch in the coming months after the motor is broken in and all the kinks are worked out..
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I might sell you my starter if you want it.. only cranked the motor over like 3 times with it before i pulled it, its from autozone and i was thinking about upgrading to a lt4 mini starter.
Thanks man. im excited the next batch of pics will be with hdr camera.. As fasr as painting the engine bay i probably will just touch it up.. i used simple green and a pressure washer to clean it..
The car was in pretty bad shape when i got it.. its def. come a long way..
its a stock rebuilt shortblock but with the additon of arp rodbolts, total seal rings, H series bearings.. valve train is cc306 cam stage 3 ported heads by flotech crane 10308 dual springs and 1.6 roller rockers.
