Lets see some pics of your LT1 f-body
11-11-2010, 05:44 PM
#123
TECH Fanatic
iTrader: (26)
Join Date: Mar 2010
Location: Milledgeville, GA
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
Haha...yeah the company I bought it from payed me $500 for letting them use a few pictures of their fiberglass SS hood that I used on my Z28. Next thing I knew, 12 different companies were advertising it on their web pages. This is the other one they put up as well...
I wonder if you could be collecting from each of those other companies for using your picture??
11-11-2010, 10:08 PM
#127
Fitment/quality/paint- Fitment was so so. The bottom side of the actual Ram Air hit the alternator and when the car was running, it grinded about a 1 inch long hole into the hood. I didn't realize it hit because it actually shut/closed just fine. Other then that it fit just fine.
Prepping and painting it on the other hand...lol Let's just say the paint shop told me that they would never paint a fiberglass hood again. A lot of waves in it so they had to bondo the shi* out of it and the paint took SEVERAL coats to stick and look decent. Here is where the paint shop F up...they originally told me it would run about $300-350 to prep and paint it. In the end, it probably cost them a couple grand with materials and labor. They tried to half *** it and give it back to me and I was like, hell no. You said you could do the job right the first time, so that's what I expected. They were really pissed about the whole transaction which I don't blame them. At least they are aware of what not to bid out at the begging now huh...lol
11-13-2010, 08:47 AM
#135
Teching In
Join Date: Jan 2008
Location: Reading, PA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Strange 12 Bolt 3.73 gears
MSD Wires,Coil,Opti
OEM Water pump
Fuel Filter
8 Spark plugs TR-55
UMI panhard bar/ LCA's
Bilstein Rear Shocks
Cleaned valves
New head gaskets, intake gasket, valve cover, header
WS6 store pistol grip/ Pro 5.0 w/ Ws6 Store short stick
RAM HD clutch/ New slave cylinder
Headers/ 3 inch exhaust back
K&N CAI
Black ZR1 17x9.5 17x11
Madtuner tune
Im sure there is some stuff I am forgetting but that is most of it.
First time posting up my car let me know what you guys think
Senior prom last year
]
The black formula with red interior is my friends dad. I was wondering is the car as rare as it seems? Its a 95 formula 6 speed red interior convertible
MSD Wires,Coil,Opti
OEM Water pump
Fuel Filter
8 Spark plugs TR-55
UMI panhard bar/ LCA's
Bilstein Rear Shocks
Cleaned valves
New head gaskets, intake gasket, valve cover, header
WS6 store pistol grip/ Pro 5.0 w/ Ws6 Store short stick
RAM HD clutch/ New slave cylinder
Headers/ 3 inch exhaust back
K&N CAI
Black ZR1 17x9.5 17x11
Madtuner tune
Im sure there is some stuff I am forgetting but that is most of it.
First time posting up my car let me know what you guys think
Senior prom last year
]The black formula with red interior is my friends dad. I was wondering is the car as rare as it seems? Its a 95 formula 6 speed red interior convertible
11-13-2010, 01:09 PM
#138
I liked them too but the TT2s came up and sold them to a buddy of mine. I might go back to them down the road but instead of 17x9s all the way around if opt for going to 18x7 and 18x8/9s so there isnt a 2" lip on all fours and after the staggered look. Seen them on another car and the stance and size looked much better IMO with these rims. There SportMaxx 962s.
