3 inch under the axle TD build thread
#1
Thread Starter
TECH Veteran
iTrader: (20)
3 inch under the axle TD build thread
***SOUND CLIPS ON POST 73***
Figured I'd start a thread on this to help out some guys that drive their cars on the street mostly. I'm ditching my ORY/GMMG setup for a 3 inch under the axle TD system. Being in CA I don't want to take anymore chances with my car being loud as hell and it is getting annoying for a DD. Most people told me to get a Hooker/Magnaflow to replace my GMMG but for the same price after selling it I could have TDs. Here's a breakdown of parts/costs excluding labor (Im expecting around $400)
2 Borla Pro XS Mufflers. 3 inch offset inlet/center outlet. Both will go under the backseats on each sides. I chose these because in a test done by a Mustang magazine they were the quietest out of 12 or 13 different mufflers of all brands including Magnaflow and came 3rd in power behind open Flowtech Warlocks (essentially cutouts) and Hooker Maxflows. Both were $178
Internal shot
My hand on one to put the size in perspective
Thunderbolt Cats/X pipe
Decided to go with these for price/reviews. Several people had good results with these cats and said they looked identical to Magnaflows 59959 highflow cats. For the pair it was $120 shipped. The x pipe was another $30 shipped, looks very similar to the Magnaflow X as well
Figured I'd start a thread on this to help out some guys that drive their cars on the street mostly. I'm ditching my ORY/GMMG setup for a 3 inch under the axle TD system. Being in CA I don't want to take anymore chances with my car being loud as hell and it is getting annoying for a DD. Most people told me to get a Hooker/Magnaflow to replace my GMMG but for the same price after selling it I could have TDs. Here's a breakdown of parts/costs excluding labor (Im expecting around $400)
2 Borla Pro XS Mufflers. 3 inch offset inlet/center outlet. Both will go under the backseats on each sides. I chose these because in a test done by a Mustang magazine they were the quietest out of 12 or 13 different mufflers of all brands including Magnaflow and came 3rd in power behind open Flowtech Warlocks (essentially cutouts) and Hooker Maxflows. Both were $178
Internal shot
My hand on one to put the size in perspective
Thunderbolt Cats/X pipe
Decided to go with these for price/reviews. Several people had good results with these cats and said they looked identical to Magnaflows 59959 highflow cats. For the pair it was $120 shipped. The x pipe was another $30 shipped, looks very similar to the Magnaflow X as well
Last edited by hitmanws6; 01-29-2011 at 09:39 PM.
Trending Topics
#14
Resident Racing Jerk
iTrader: (1)
Joined: Dec 2002
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
From: sc
are you still running a rear seat? if not, cut the "bubble" out from each side and replace with flat sheet..... could fit mufflers under that area then. i also dont care for under the axle duals. i would either do turndowns or get creative to get the pipes over the axle and hidden.
#19
TECH Resident
iTrader: (21)
Joined: Aug 2006
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
From: Wichita KS
Or if want to try to go over the axle you could mount them like this
http://www.camaroz28.com/forums/show...8&postcount=12
http://www.camaroz28.com/forums/show...8&postcount=12