396 Stroker SR build FTMFW!
#1
396 Stroker build/UPDATE/Dyno tuned
Well a few friends and I made a trip to Mexico about 2 months ago. Just installed my new 315 M/T's, new LC-1 and installed my Purge for my nitrous. It was Goin be a GOOD NIGHT!
Well I beat all the cars I wanted to that night, BUT ended up with a nice little squeak... =(
Needless to say, I needed a new motor. Well the next week I drove to TX and picked me up another motor. =)
Picked up a 396 stroker shortblock completely FORGED at 12.0.1 on unmilled stock heads!
Eagle crank
Lunati Rods
SRP Pistons -11cc
Callies 4 bolt splayed main caps
And I'm going with a Solid roller set up that original went with the motor.
Cam Motion 255/263 and the lift is somewhere north of +.650"
My heads will be holding me back as I'm going with a fully ported 364 with 2.02/1.60's, but they'll do for now.
I'll add pics and vids next time I'm at comp.
The rest of the build will take some time considering I spent ALL my cash on the shortblock, but it'll get there lol
Well I beat all the cars I wanted to that night, BUT ended up with a nice little squeak... =(
Needless to say, I needed a new motor. Well the next week I drove to TX and picked me up another motor. =)
Picked up a 396 stroker shortblock completely FORGED at 12.0.1 on unmilled stock heads!
Eagle crank
Lunati Rods
SRP Pistons -11cc
Callies 4 bolt splayed main caps
And I'm going with a Solid roller set up that original went with the motor.
Cam Motion 255/263 and the lift is somewhere north of +.650"
My heads will be holding me back as I'm going with a fully ported 364 with 2.02/1.60's, but they'll do for now.
I'll add pics and vids next time I'm at comp.
The rest of the build will take some time considering I spent ALL my cash on the shortblock, but it'll get there lol
Last edited by Green3spd; 04-05-2013 at 12:52 AM.
Trending Topics
#8
Launching!
iTrader: (6)
Join Date: Feb 2010
Location: St Petersburg, Fl
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking forward to seeing this build, should be nice. Glad you made it back from Mexico..lol. One of my older brothers went there in the late 80's with two of his best friends; one of those friends stayed there for an aditional 6 months. Dont go drinking and then pass out on the Mexican Side of the bridge with a pocket full of "stuff" lol.
Are there going to be any other upgrades?
Are there going to be any other upgrades?
#10
Goin be stock comp for now. Haven't REALLY looked into upgrading it. Any opinions?
I'm looking forward to seeing this build, should be nice. Glad you made it back from Mexico..lol. One of my older brothers went there in the late 80's with two of his best friends; one of those friends stayed there for an aditional 6 months. Dont go drinking and then pass out on the Mexican Side of the bridge with a pocket full of "stuff" lol.
Are there going to be any other upgrades?
Are there going to be any other upgrades?
Other than a complete build, no. Car will still be the 7.87 1/8th cam only set up.
No, forged eagle
#11
If money wasn't an issue I would have a DFI or FAST with a standalone harness.
#12
I'm on a budget now so I will be running a crank trigger setup, and either Wickeds modded computer if he can pull it off, or an LS computer. Once you get some heads that breathe you'll really need the RPMs with a cam like that, even on a 396 .
If money wasn't an issue I would have a DFI or FAST with a standalone harness.
If money wasn't an issue I would have a DFI or FAST with a standalone harness.
#13
Well changed my game plan. Going stick with a HR. It has took me some time but it's coming together.
I Finally recieved my flow numbers and was very pleased with them!
2.02/1.60
.100 70/59
.200 147/112
.300 215/148
.400 257/177
.500 285/191
.600 290/198
(No pipe)
Intake runner 206
Exhaust runner 62
Waiting on Ed Curtis to spec my cam and ship then let the games begin! Lol
I'll keep it updated
I Finally recieved my flow numbers and was very pleased with them!
2.02/1.60
.100 70/59
.200 147/112
.300 215/148
.400 257/177
.500 285/191
.600 290/198
(No pipe)
Intake runner 206
Exhaust runner 62
Waiting on Ed Curtis to spec my cam and ship then let the games begin! Lol
I'll keep it updated
#16
It's coming together still. Not yet done with h/c change on my 350 and I just bought a forged 383 shortblock. So I'm not sure what I'm gonna end up doing at this moment. Nice to see ya stayin at it and it looks like it's gonna be a beast. It's nice gabbing at ya again, been a while. Maybe see ya at bowling green?
#18
It's coming together still. Not yet done with h/c change on my 350 and I just bought a forged 383 shortblock. So I'm not sure what I'm gonna end up doing at this moment. Nice to see ya stayin at it and it looks like it's gonna be a beast. It's nice gabbing at ya again, been a while. Maybe see ya at bowling green?
Ha