400 horse power LT1 built..
#1
On The Tree
Thread Starter
Join Date: Dec 2010
Location: LONG BEACH 2 THA INLAND EMPIRE
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
400 horse power LT1 built..
My ideal set up
3:73 gears
3000 stall
Stock crank
Forged pistons (still deciding)
Cam (still deciding)
Ported heads
Ported intake manifold
Ported TB
SLP air intake
Long tube headers into a y pipe with magnaflow exaust.
Am I forgetting any of the basics? Im going for 400HP TO THE TIRES.. I will be spraying as well.. 125-150 shot
3:73 gears
3000 stall
Stock crank
Forged pistons (still deciding)
Cam (still deciding)
Ported heads
Ported intake manifold
Ported TB
SLP air intake
Long tube headers into a y pipe with magnaflow exaust.
Am I forgetting any of the basics? Im going for 400HP TO THE TIRES.. I will be spraying as well.. 125-150 shot
Trending Topics
#12
TECH Fanatic
#15
On The Tree
Thread Starter
Join Date: Dec 2010
Location: LONG BEACH 2 THA INLAND EMPIRE
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
@ lawhead
I've heard good things bout that cam.. Even on the threads on here.. Any other cam options.. Because once I have the specs from the cam I can go and get everything else matched up..
I've heard good things bout that cam.. Even on the threads on here.. Any other cam options.. Because once I have the specs from the cam I can go and get everything else matched up..
#18
On The Tree
Thread Starter
Join Date: Dec 2010
Location: LONG BEACH 2 THA INLAND EMPIRE
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
And I was including the 125-150 shot into my build.. So as a total of 400rwhp on the bottle.. Off the bottle Ill take about 350 to the motor.. I still drive the car so I don't want it outrageously raced out
#20
TECH Fanatic
iTrader: (1)
350 on motor can be done with a cam only. With good ported heads, 350 on motor can be done with an extremely mild cam. Look at AI's website and you'll get an idea of cam sizes you should consider. They're very realistic with their estimated hp numbers.