It's a shame they stopped making them. 
Fix or replace SLP's 2 on the left muffler?
Fix or replace SLP's 2 on the left muffler? As far as I can tell SLP no longer makes the "2 on the left" muffler and mine is in pretty bad shape.
Is it possible to repair it or should I just replace it and with what? What would fit those twin 2 1/2" tailpipes?
Is it possible to repair it or should I just replace it and with what? What would fit those twin 2 1/2" tailpipes?
Last edited by Rob94hawk; Oct 12, 2011 at 07:55 AM.
Magnaflow makes some killer dual in/dual out muffler cases, but they are pretty loud. Basically it's two of their straight through race bullets sharing a single outer case for smaller a footprint. I would measure the distance center to center from each pipe then match something up on their website.
The 2OTL is an awesome factory exhaust, and actually flows very well. Both tips are on the left so they could use better flowing mufflers and still pass the drive by decibel test - which places the mic on the right side of the car. Pretty slick IMO.
The 2OTL is an awesome factory exhaust, and actually flows very well. Both tips are on the left so they could use better flowing mufflers and still pass the drive by decibel test - which places the mic on the right side of the car. Pretty slick IMO.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Edit: no that's not it. The 3" inlet on my muffler is in the middle. This one is on the side.
Last edited by Rob94hawk; Oct 7, 2011 at 03:32 PM.
The cone of silence mod! Just kidding, LT1 old schoolers will know what that is. SLP sold replacement mufflers for a while, that truck muffler may be it. Call and see. I'd fix it, very unique exhaust.
Maybe I'll call my machine shop and see if they'll weld it all back up with stainless.
Have a muffler shop build you some thing custom, I think it would be cool to do twin stainless works chambered mufflers, like have the intermediate pipe come over the axle and split in to, feeding two chambered mufflers, then have each muffler exit to the left in the same fashion as the SLP two on the left. Would be like a GMMG/SLP Two on the left mutt