electrical stud
Thread Starter
Staging Lane
Joined: Mar 2011
Posts: 88
Likes: 0
electrical stud i was gonna upload a pic but for some reason the email wont send from the phone to the computer, so if it works ill upload it later, but...
on the passenger side of the car on the wire loom that has the connectors for the starter and o2 sensors, there is a small stud maybe 1-1.5 inches long with and electrical wire bolted on via a nut.
i have no idea what it is for, my 1st instinct was the starter but there is no place to screw it in. it is pretty small in diameter
any info would help alot
1997 lt1 camaro
on the passenger side of the car on the wire loom that has the connectors for the starter and o2 sensors, there is a small stud maybe 1-1.5 inches long with and electrical wire bolted on via a nut.
i have no idea what it is for, my 1st instinct was the starter but there is no place to screw it in. it is pretty small in diameter
any info would help alot
1997 lt1 camaro
Thread Starter
Staging Lane
Joined: Mar 2011
Posts: 88
Likes: 0
well **** me in the ***....
when putting that wire loom on the block, i broke the bolt i was using flush in that hole..
is it possible to ground that ANYwhere else?
or maybe i could drill a hole in the block and tap it?
id rather do almost anything else other than remove the engine again and ez-out that sucker
man i feel really really stupid right now
when putting that wire loom on the block, i broke the bolt i was using flush in that hole..
is it possible to ground that ANYwhere else?
or maybe i could drill a hole in the block and tap it?
id rather do almost anything else other than remove the engine again and ez-out that sucker
man i feel really really stupid right now
Thread Starter
Staging Lane
Joined: Mar 2011
Posts: 88
Likes: 0
thanks so much!
now just one more question. it may be a dumb question, idk, but can you drill the hole in the ground to make it the size of the larger side of the stud? or does the ground have to have a certain amount of metal on it in order to work correctly?
sorry, im relatively new to mechanics and know about as much as they tell you in public high school science class about electricals (which is close to nothing)
now just one more question. it may be a dumb question, idk, but can you drill the hole in the ground to make it the size of the larger side of the stud? or does the ground have to have a certain amount of metal on it in order to work correctly?
sorry, im relatively new to mechanics and know about as much as they tell you in public high school science class about electricals (which is close to nothing)
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
