LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Impala SS track results

Thread Tools
 
Search this Thread
 
Old 12-17-2011 | 10:57 PM
  #1  
2NASSTY's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Aug 2005
Posts: 62
Likes: 0
Default Impala SS track results

New motor track results. NA, 4400 lbs with driver, DA 958. Still on pump gas tune. Full exhaust, full interior, AC.

Updated track results. Went back today for day 2 of grudge wars. DA was 602. Hit my preliminary NA goal for this motor. I think there is more left it in similar or better air.
Attached Thumbnails Impala SS track results-12.17.2011_bradenton.jpg   Impala SS track results-12.18.11_grudge-wars.jpg  

Last edited by 2NASSTY; 12-21-2011 at 10:09 PM.
Old 12-17-2011 | 11:07 PM
  #2  
3DFORMULA's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: May 2007
Posts: 625
Likes: 0
Default

Sweet numbers there for a full size car, congrats.
Old 12-17-2011 | 11:28 PM
  #3  
robsquikz28's Avatar
TECH Veteran
iTrader: (246)
 
Joined: Mar 2008
Posts: 4,984
Likes: 0
From: Chicago/Crown point
Default

pics of this said engine combo
Old 12-17-2011 | 11:36 PM
  #4  
BADHAWK51's Avatar
10 Second Club
iTrader: (1)
 
Joined: Jan 2003
Posts: 1,516
Likes: 0
From: Chicagoland Area
Default

Congrats on the time ! that thing is making some power.
Old 12-17-2011 | 11:43 PM
  #5  
2NASSTY's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Aug 2005
Posts: 62
Likes: 0
Default

Originally Posted by robsquikz28
pics of this said engine combo
Engine pic enclosed
Attached Thumbnails Impala SS track results-resampled_2011-05-25_12-23-52_954.jpg  
Old 12-17-2011 | 11:47 PM
  #6  
2NASSTY's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Aug 2005
Posts: 62
Likes: 0
Default

Originally Posted by 3DFORMULA
Sweet numbers there for a full size car, congrats.
Originally Posted by BADHAWK51
Congrats on the time ! that thing is making some power.
Thanks Fellas. I believe there still is a lot on the table NA.
Old 12-18-2011 | 12:15 AM
  #7  
3DFORMULA's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: May 2007
Posts: 625
Likes: 0
Default

Nice looking engine pic
Old 12-18-2011 | 08:42 AM
  #8  
CamaroRacing12's Avatar
11 Second Club
iTrader: (5)
 
Joined: Apr 2007
Posts: 3,779
Likes: 2
From: Haverhill, Mass
Default

congrats man. nice run
Old 12-18-2011 | 06:30 PM
  #9  
SoxXpupPeT's Avatar
TECH Junkie
iTrader: (34)
 
Joined: May 2008
Posts: 3,431
Likes: 1
From: Yonkers, NY
Default

Very nicely done! hows the fast ecu working out?
Old 12-18-2011 | 06:42 PM
  #10  
Uwilllosetomy93lt1's Avatar
On The Tree
 
Joined: Dec 2011
Posts: 109
Likes: 0
From: Kissimmee, Florida
Default

What gear you running and at what rpm r u at the end of the 1/4? That's pretty good considering the weight...
Old 12-18-2011 | 07:08 PM
  #11  
Nmbr1GMfan's Avatar
TECH Apprentice

iTrader: (1)
 
Joined: Dec 2004
Posts: 362
Likes: 0
From: Sarasota, FL.
Default

Saw you at the track yesterday, looks sweet.
Old 12-18-2011 | 07:45 PM
  #12  
2NASSTY's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Aug 2005
Posts: 62
Likes: 0
Default

Originally Posted by SoxXpupPeT
Very nicely done! hows the fast ecu working out?
I love the F.A.S.T. unit. Made individual cell A/F, and base fuel table adjustments after every pass, and it picked up each time.

Last edited by 2NASSTY; 12-18-2011 at 08:18 PM.
Old 12-18-2011 | 07:46 PM
  #13  
2NASSTY's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Aug 2005
Posts: 62
Likes: 0
Default

Originally Posted by Uwilllosetomy93lt1
What gear you running and at what rpm r u at the end of the 1/4? That's pretty good considering the weight...
4.10 gear. 7500 rpm on a 26". Thanks Man.
Old 12-18-2011 | 07:47 PM
  #14  
2NASSTY's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Aug 2005
Posts: 62
Likes: 0
Default

Originally Posted by Nmbr1GMfan
Saw you at the track yesterday, looks sweet.
Thanks Man
Old 12-18-2011 | 07:58 PM
  #15  
hvyss's Avatar
TECH Apprentice
 
Joined: May 2005
Posts: 349
Likes: 0
From: Mount Sterling KY
Default

Originally Posted by 2NASSTY
Thanks Fellas. I believe there still is a lot on the table NA.
Chett
You damn right there is still a lot left on the table. With your setup and some more tuning on the old FAST the car will run 11.0's or high 10's N/A. Setup right on nitrous you will kick my ***!!! Great runs I would recommend going to a 28" tall tire though. On my 9.92 pass the car was on the rev limiter at 7000 for approx 200 ft on a 28" tall tire.

Last edited by hvyss; 12-18-2011 at 08:06 PM.
Old 12-18-2011 | 08:22 PM
  #16  
2NASSTY's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Aug 2005
Posts: 62
Likes: 0
Default

Originally Posted by hvyss
Chett
You damn right there is still a lot left on the table. With your setup and some more tuning on the old FAST the car will run 11.0's or high 10's N/A. Setup right on nitrous you will kick my ***!!! Great runs I would recommend going to a 28" tall tire though. On my 9.92 pass the car was on the rev limiter at 7000 for approx 200 ft on a 28" tall tire.
Thanks Frank!! You are right on all counts. I tried these 26" tires NA to see what would happen and everything picked up. Cheap way of changing your gear ratio. The 28" tires will go back on with the bottle.

And I seriously doubt that I will kick your *** on nitrous lol. You have your combo completely dialed-in and I know you will not be sittiing still. I am just scratching the surface right now.

Last edited by 2NASSTY; 12-18-2011 at 08:27 PM.
Old 12-18-2011 | 08:34 PM
  #17  
hvyss's Avatar
TECH Apprentice
 
Joined: May 2005
Posts: 349
Likes: 0
From: Mount Sterling KY
Default

Originally Posted by 2NASSTY
Thanks Frank!! You are right on all counts. I tried these 26" tires NA to see what would happen and everything picked up. Cheap way of changing your gear ratio. The 28" tires will go back on with the bottle.

And I seriously doubt that I will kick your *** on nitrous lol. You have your combo completely dialed-in and I know you will not be sittiing still. I am just scratching the surface right now.
Chett
I would die for your top end setup. At the time I setup the car I just didn't want to part with extra 1500 for the jesel's and lifters and the springs and push rods to run a solid roller. And on the stock PCM it would have useless. Couldn't rev it high enough to get all it had to offer.
Old 12-18-2011 | 09:28 PM
  #18  
cammednasty's Avatar
Teching In

 
Joined: Nov 2011
Posts: 41
Likes: 0
From: America
Default

feels good man,feels good.
Old 12-18-2011 | 11:08 PM
  #19  
01ssreda4's Avatar
TECH Senior Member
iTrader: (96)
 
Joined: Aug 2007
Posts: 24,241
Likes: 83
From: Turnin' Wrenches Infractions: 005
Default

She's quick
Old 12-19-2011 | 12:28 AM
  #20  
GM PHASST's Avatar
On The Tree
 
Joined: Apr 2010
Posts: 162
Likes: 0
From: Philly
Default

B-Body FTW!


Quick Reply: Impala SS track results



All times are GMT -5. The time now is 05:51 AM.