My 95 Z28
01-11-2012, 11:41 PM
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: May 2011
Location: Bay Area,Ca
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
My 95 Z28 I Traded my 98 Dodge Ram About 4-5 Months ago For My 95 Camaro Z28.
Im 15, So My Budget Was Obviously Low.
So for X-mas and My B-Day i asked for no presents and just some $, So i could Mod my Car to My Likings.
Since iv'e Always Been Around High Performance Cars, Boats, Ect... I Wanted My Car To Have Some Power.
Heres A Pic Of The Car:
I Started With Some Of The Simple Bolt Ons:
Then i Went On To More Of The Performance Stuff:
The Cam Is A CC306, Lifters are Replacements, CC Hardend Pushrods, ARR RollerRocker's, Crane Springs...
My Next Mod Will Be To Send The Heads To Lyod Elliot For Some Porting.
For Now My Goals:
Make Around 350-370RWHP (Stock Heads) After Dyno Tune.
And Run In The 12.5-12.8 Range.
Tyler
Im 15, So My Budget Was Obviously Low.
So for X-mas and My B-Day i asked for no presents and just some $, So i could Mod my Car to My Likings.
Since iv'e Always Been Around High Performance Cars, Boats, Ect... I Wanted My Car To Have Some Power.
Heres A Pic Of The Car:
I Started With Some Of The Simple Bolt Ons:
Then i Went On To More Of The Performance Stuff:
The Cam Is A CC306, Lifters are Replacements, CC Hardend Pushrods, ARR RollerRocker's, Crane Springs...
My Next Mod Will Be To Send The Heads To Lyod Elliot For Some Porting.
For Now My Goals:
Make Around 350-370RWHP (Stock Heads) After Dyno Tune.
And Run In The 12.5-12.8 Range.
Tyler
01-12-2012, 10:59 AM
#7
TECH Apprentice
iTrader: (1)
Join Date: Apr 2010
Location: Newark,DE
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Take a look at the water pump, and opti while your in there. If they are originial/worn/otherwise fudged up, change them. Save yourself major time and trouble.
