220CNC TEA/Trick Flows :)** Dyno sheet RESULTS**
#43
Launching!
Thread Starter
iTrader: (14)
Join Date: Jan 2009
Location: Eden, NC
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Update my tuner just emailed me and told me the results it made on the dyno. I should have the dyno sheets up once he sends them to me
only thing was put on was trick flow lt4 220 heads, lt4 Intake and 42lbs injectors 11:1
Picked up 42rwhp on motor
449rwhp 407 rwtq
608rwhp 595 rwtq on 175 shot
only thing was put on was trick flow lt4 220 heads, lt4 Intake and 42lbs injectors 11:1
Picked up 42rwhp on motor
449rwhp 407 rwtq
608rwhp 595 rwtq on 175 shot
Last edited by lt4388stroker; 04-16-2012 at 12:54 PM.
#48
#53
11 Second Club
iTrader: (6)
Update my tuner just emailed me and told me the results it made on the dyno. I should have the dyno sheets up once he sends them to me
only thing was put on was trick flow lt4 220 heads, lt4 Intake and 42lbs injectors 11:1
449rwhp 407 rwtq
609rwhp 595 rwtq on 175 shot
only thing was put on was trick flow lt4 220 heads, lt4 Intake and 42lbs injectors 11:1
449rwhp 407 rwtq
609rwhp 595 rwtq on 175 shot
#55
Nice numbers, but the exhaust numbers are super high...
At .500 lift your heads flow 300/243
Some examples of other popular LTx stuff:
AI CNC TFS at .500 flow 285/196 (AI website)
LE TFS at .500 flow 285/197 (on a recent customer's heads)
AFR 227's with race port at .500 flow 288/208 (my heads)
At .500 lift your heads flow 300/243
Some examples of other popular LTx stuff:
AI CNC TFS at .500 flow 285/196 (AI website)
LE TFS at .500 flow 285/197 (on a recent customer's heads)
AFR 227's with race port at .500 flow 288/208 (my heads)
Al 95 Z28 with screwed up stock heads.
#58
Launching!
Thread Starter
iTrader: (14)
Join Date: Jan 2009
Location: Eden, NC
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=96capricemgr;16191533]Why is the torque number so low? Looks 30-40ft.lbs. lower than I would expect from a stroker like this.[/QUOTE
yea i agree I was expecting a higher torque curve on motor as well, but I cant complain with the power it made haha
yea i agree I was expecting a higher torque curve on motor as well, but I cant complain with the power it made haha