LTX Shootout CALLOUTS! Multiple classes! See if you are inside
#42
#43
I was running 110-111 before my EWP, CHRIS1313 ram air, and 9" with 4.11s at 12.5 with an easy 1.85 60', hoping for around 12.0 when I get RRs and new springs put on with a new clutch at around 112-113. But I need to add 300lbs to the car to make class, so should be around 12.3.
#47
Appreciate the vote but I'm running a Spec stage 1 clutch on a 18 year old stock 10 bolt. Not even sure if either one would survive the day even if I did bracket. I've got plans to change all that but got to save more coin to pull it off. Maybe next season.
#48
I'm not going to post the regular guys who already attend, this is for the guys with quick cars that would do very well, but haven't been back to the shootout in a while or have never attended.
Mod N/A
Joe O
Rick Abare
Warren Dempsey
Dave Odenahl
Todd Swith aka TWS
PUCK
05HD
Wicked94Z
Extreme Street N/A
Thunderchicken
BOLO
chas010
Geramie Ingram
3DFORMULA
SexyTransAm
RamAir95TA
SS MPSTR
gregrob
James Montigny
TravisMcGill2000
95mysticta
355z28
z_speedfreak
Dave357LT1
WS Sick
transbird95
Rob94Hawk
lethal bird
Matts94Z28
andrew ws6
95sscamaro
Lt4388Stroker
flyinZ
Z28Camaro30Ann
^^just about every one of these cars is a bottom-mid 11 second car in the heat. That class would be insane if they all made it along with the regulars like BADHAWK. I dig a little digging through some recent threads and looked at sigs, and there are tons of cars that fit into the class.
Street Stock
1SlowFormula
Shon Herron
bufmatmuslepants
Bersaglieri
jrock692
94LT1TA6spd
Blue85350
pillarpod
That would be one hell of a weekend if most of the guys could make it. More of a party/event then a serious race. Everyone that goes to it has a blast.
Mod N/A
Joe O
Rick Abare
Warren Dempsey
Dave Odenahl
Todd Swith aka TWS
PUCK
05HD
Wicked94Z
Extreme Street N/A
Thunderchicken
BOLO
chas010
Geramie Ingram
3DFORMULA
SexyTransAm
RamAir95TA
SS MPSTR
gregrob
James Montigny
TravisMcGill2000
95mysticta
355z28
z_speedfreak
Dave357LT1
WS Sick
transbird95
Rob94Hawk
lethal bird
Matts94Z28
andrew ws6
95sscamaro
Lt4388Stroker
flyinZ
Z28Camaro30Ann
^^just about every one of these cars is a bottom-mid 11 second car in the heat. That class would be insane if they all made it along with the regulars like BADHAWK. I dig a little digging through some recent threads and looked at sigs, and there are tons of cars that fit into the class.
Street Stock
1SlowFormula
Shon Herron
bufmatmuslepants
Bersaglieri
jrock692
94LT1TA6spd
Blue85350
pillarpod
That would be one hell of a weekend if most of the guys could make it. More of a party/event then a serious race. Everyone that goes to it has a blast.
You keep coming up with a good list of cars Joel. I hope everyone listed can make it plus get their friends to come to.
#51
#52
Its gettin a 396 with callies dragonslayer & howards billet rods , je or diamond custom nitrous pistons , ported lt1 intake & Dart Pro 1 200cc heads (shootin for 12 to 1 comp) , cam will be 24x/25x .6xx ,stainless 1.6 rr , 42lb injectors , 58mm tpis tb , runnin opti , built 4L60E with 3xxx stall. Should be Extreme Street P/A. But I will have to turn off 1 stage of nitrous LoL Not bad for a 95 T/A wkend toy Itll get some UMI adjustable stuff for the rear & rollin on speedlines. I will do a build after its all done So the flaming can be after what I post. LoL IF the P/A guys are too fast I might pull the bottle & run N/A Just need pistons & cam motor wise!!! Sorry for the book.
Last edited by warriorcustoms; 04-24-2012 at 11:14 PM.
#54
Its gettin a 396 with callies dragonslayer & howards billet rods , je or diamond custom nitrous pistons , ported lt1 intake & Dart Pro 1 200cc heads (shootin for 12 to 1 comp) , cam will be 24x/25x .6xx ,stainless 1.6 rr , 42lb injectors , 58mm tpis tb , runnin opti , built 4L60E with 3xxx stall. Should be Extreme Street P/A. But I will have to turn off 1 stage of nitrous LoL Not bad for a 95 T/A wkend toy Itll get some UMI adjustable stuff for the rear & rollin on speedlines. I will do a build after its all done So the flaming can be after what I post. LoL IF the P/A guys are too fast I might pull the bottle & run N/A Just need pistons & cam motor wise!!! Sorry for the book.
Sounds like you got a plan that should be a stout build and run strong. hope to see it at the shootout.
#55
It should hurt some ford & hemi feelings Lmao Already gotta race lined up My buddy in south texas is a ford nut & thinks his boss 302 70 maverick with a tunnel ram is gonna beat me NOT LoL He doesnt know about the 2 NX kits Ive bought a bunch of parts off this site too If I woulda paid retail on things like my 2 stages of nitrous , 42lb injectors & Pro 1 heads It would definately take longer LoL
Last edited by warriorcustoms; 04-25-2012 at 08:06 PM.
#56
Work on your suspension and get it to hook and he won't know what hit him.
#57
Yup then he will be like this LMAO Im removing all the little **** like abs , power leather seats , etc... Already have a ram air hood & intake Before I start addin SFCs & stuff Its prolly @ 3300 give or take Need to weigh it Its a hard top T/A Itll definately smoke the old 3rd gen I build when I worked at Borg Warner
#58
I was going to test out the Hoosier Drag Radial in that size. Read about a few on here using that size tire cutting some rather impressive times. Though there is only one way to find out for sure
#59
I would have put you on the list but for some reason I thought you sold your car.
#60
I would love to make it. New motor and th400 going in within four months or so. So id have to run MOD NA. So if i make it ill bring some throttle stops and install them while everyone is in a drunkin stuper so i can have a chance!