Ta at the track first time tom!!
#1
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Aug 2011
Location: ottawa ohio
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Ta at the track first time tom!!
Well after all the time I put into the car finally goin to the track tom. Whats your best guess with time. 355 with le lt4 heads and ported intake 30lb injectors 306 cam and mt radials subframe connectors lower control arms and panhard bar and 411 gears through m6
Last edited by Luke1996ta; 08-09-2012 at 06:07 PM.
Trending Topics
#9
TECH Junkie
iTrader: (31)
4.10s with drag radials in a 10 bolt? R/T .658 and then boom 10 bolt
I drove my 4.10s around for roughly 2 months went to the track 2 times and 1 time on DRs and that was it 2 1/4 teeth were missing on the ring gear now I will not have that problem ever again.......8.8 is ready!!!!!!!
I drove my 4.10s around for roughly 2 months went to the track 2 times and 1 time on DRs and that was it 2 1/4 teeth were missing on the ring gear now I will not have that problem ever again.......8.8 is ready!!!!!!!
#13
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Aug 2011
Location: ottawa ohio
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Yes ten bolt haha and I do plan on launching the last pass of the day I just wanna c
What is does when I kinda roll out first. But you find the weakest part when everything is already built so kinda expecting something to break.
What is does when I kinda roll out first. But you find the weakest part when everything is already built so kinda expecting something to break.
#20
then you get home and DA correct it to make yourself feel better, and hypothetically lower your 60' lol.
CC306 with ported heads should be good for low low 12's to high 11's. But honestly, just have fun. Once you start not having fun is when it gets ugly. You could see anywhere from high 11's to low 13's.