HarleyZ28

iTrader: (2)

What cam grind for the LT1 would be the same as the Ms3 cam for Ls1?

Speedy

What do you mean by the same? Same rwhp? Same sound? Same grind?

HarleyZ28

iTrader: (2)

Same grind.

I would guess the sound would come with it.

bufmatmuslepants

iTrader: (3)

We dont have cool names for cams like MagicStick 3 and StreetSweeper etc etc. Just get the specs, call someone who grinds, and tell them. But LS engines work differently than ours.

warriorcustoms

iTrader: (10)

My Cam Motions Solid Roller is 255/262 @ .05 with .686/.662 lift Im sure those guys have one in the high 230s Mine will be in my 396 though Wouldnt run that in a 355

bufmatmuslepants

iTrader: (3)

MS3 is 237/242 0.603/0.609 on a 111 to 115 LSA, our motors like 110 a little more with that much lift. Like I said, LS and LT motors like different things.

nomoneyz

iTrader: (15)

Just go custom grind. Ls1's have a different power band. I can't imagine just throwing in an ls1 grind cam would work too well.

gregrob

iTrader: (8)

In terms of internet forum nomenclature the CC306 would be the equivalent of the MS3

....and they're both ******* junk!

SS RRR

iTrader: (2)

Because your brothers cousin had one in a f-body oncet and you raced from a roll and beat it with only rockers to come up with such an overly educated opinion. How could a 306 be junk when it has been responsible for putting so many LT1's into the 11's before you were ever around? Combos back then were hodge podge. There were no custom grinds or custom heads/cam packages available and it still did well. Better than most of the average custom LE setups these days.

gregrob

iTrader: (8)

TwoFast4Lv

iTrader: (8)

Sorry I do not buy a stupid name ... Hell I don't even sell them! I sell Horse Power and Torque!

green96ta

iTrader: (11)

The cc306 would be the closest comparison for an off the shelf grind

RamAir95TA

iTrader: (2)

It amazes me the questions asked on this forum nowadays.

95mysticta

iTrader: (4)

You really need to access what you want to do this car. Once you know what you want to achieve give LE or AI a call and have them spec you h/c package to meet your goal. Do not just put a big *** cam in and think its going to perform. It may sound nasty but without a matching setup its a waste

lt1slowz28

can I buy the 150/150 package? PM me

93M6Formula

No kidding.....I understand these cars are cheap as hell anymore and anybody and their dog can own one but damn. The dumb questions lately are really getting annoying.

katz_2003

iTrader: (5)

Sure! It comes in a bottle formula even!

sweetbmxrider

iTrader: (13)

Just ask the company to sell you an ms3 for your lt1. Its no problem they do this sort of stuff all the time.

pillarpod

get a custom grind and be done

96lt1m6

iTrader: (31)

I understand you are looking for a cam that is similar to the Ls series grind however, I can assure you that both motors require much different specs,events etc. In other words you will never get the same sound,performance or drivability. The motors are just too different.....