Building a 1LE drag car - pics and links
#1
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Location: Mississauga
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Building a 1LE drag car - pics and links
I was told to share this thread over here in the LT1 section.
I will be posting in the drag racing section as I build it up:
https://ls1tech.com/forums/drag-raci...ld-thread.html
I will be posting in the drag racing section as I build it up:
https://ls1tech.com/forums/drag-raci...ld-thread.html
#5
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Location: Mississauga
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Cool
Since this is an LT1 question I'll post it here I need some help on this before the transmission gets here.
Which flexplate?
http://www.jegs.com/i/Meziere/680/FP...oductId=753983
http://www.jegs.com/i/TCI/890/399173/10002/-1
My flywheel was external balance, here is a picture with drill marks in it. Can/should a shop match my old flywheel balance, to the new flexplate to balance it the same? Or is that impossible to do since the flywheel and flexplate or so different in weight and design?
Since this is an LT1 question I'll post it here I need some help on this before the transmission gets here.
Which flexplate?
http://www.jegs.com/i/Meziere/680/FP...oductId=753983
http://www.jegs.com/i/TCI/890/399173/10002/-1
My flywheel was external balance, here is a picture with drill marks in it. Can/should a shop match my old flywheel balance, to the new flexplate to balance it the same? Or is that impossible to do since the flywheel and flexplate or so different in weight and design?
#6
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Location: Mississauga
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
OH and the nitrous kit. Man it's adding up
#7
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Location: Mississauga
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
I'm posting them all in the thread over in the drag race section I just updated over here because I am too lazy to run two threads
https://ls1tech.com/forums/drag-raci...ld-thread.html
https://ls1tech.com/forums/drag-raci...ld-thread.html
Trending Topics
#8
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Location: Mississauga
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Bump
I've been updating over here https://ls1tech.com/forums/drag-raci...-thread-3.html
Not sure which place was best for the thread maybe it should be moved? <shrug>
I've been updating over here https://ls1tech.com/forums/drag-raci...-thread-3.html
Not sure which place was best for the thread maybe it should be moved? <shrug>