24x coil set up let’s see them
#41
LS1Tech Sponsor
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
But I knocked out a bunch when I got back. I still have a lead time, but am doing much better.
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic241851_3.gif)
Standalone LS Swap Harnesses IN STOCK!
LSX, LTX Stand alone swap harnesses. S10 LSX conversion PLUG AND PLAY harnesses, 24x conversion PLUG AND PLAY harnesses. LT1 to LSX PLUG AND PLAY Harnesses.
sales@bp-automotive.com
www.bp-automotive.com
1-888-467-4491
![](https://ls1tech.com/forums/signaturepics/sigpic241851_3.gif)
Standalone LS Swap Harnesses IN STOCK!
LSX, LTX Stand alone swap harnesses. S10 LSX conversion PLUG AND PLAY harnesses, 24x conversion PLUG AND PLAY harnesses. LT1 to LSX PLUG AND PLAY Harnesses.
sales@bp-automotive.com
www.bp-automotive.com
1-888-467-4491
#43
LS1Tech Sponsor
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The coils that fit my brackets are the LS2/LS7 Round coils and they do not interfere with anything on a stock setup.
There is some adjusting that will need to be done if you are using the monstrous Canton Covers
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic241851_3.gif)
Standalone LS Swap Harnesses IN STOCK!
LSX, LTX Stand alone swap harnesses. S10 LSX conversion PLUG AND PLAY harnesses, 24x conversion PLUG AND PLAY harnesses. LT1 to LSX PLUG AND PLAY Harnesses.
sales@bp-automotive.com
www.bp-automotive.com
1-888-467-4491
![](https://ls1tech.com/forums/signaturepics/sigpic241851_3.gif)
Standalone LS Swap Harnesses IN STOCK!
LSX, LTX Stand alone swap harnesses. S10 LSX conversion PLUG AND PLAY harnesses, 24x conversion PLUG AND PLAY harnesses. LT1 to LSX PLUG AND PLAY Harnesses.
sales@bp-automotive.com
www.bp-automotive.com
1-888-467-4491
#45
TECH Apprentice
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No the LS1 coils are a different footprint and they are too wide. They are the hardest to mount onto a SBC/LT1 valve cover. I would recommend selling them and getting a different set.
The coils that fit my brackets are the LS2/LS7 Round coils and they do not interfere with anything on a stock setup.
There is some adjusting that will need to be done if you are using the monstrous Canton Covers
The coils that fit my brackets are the LS2/LS7 Round coils and they do not interfere with anything on a stock setup.
There is some adjusting that will need to be done if you are using the monstrous Canton Covers
I currently have the LTCC Kit with the LS1 Coil Packs.
You are correct. They are the hardest to moint on the LT1 valve covers.
I made my own cheap bracket on the drivers side. As for the Passenger side its the most difficult since the oil cap and the alternator are located there.