BOLO

iTrader: (40)

I did the LS1 lid conversion along with a ram air ducting. Wheres the best place to relocate the intake air temperature sensor? Is it better up front forward as oppose to being placed between the throttle body and the air filter housing? Thank you in advance.

AChotrod

iTrader: (17)

Mimick the ram air box

matt94z

iTrader: (49)

I got mine in the stock location that a ls1 uses (on the neck of the lid). Just extended the wires.

BoostedDSM

iTrader: (6)

x2 I just extended my wires as well. I need a new grommet tho lost the OE one lol.

Stroked96Bowtie

iTrader: (22)

diddo, extend the wires use the factory LS1 location. If you don't want to extend the wires put it in the rubber boot between the lid and the TB.

am_muscl

iTrader: (19)

When I had mine running I extended the wire and put it near the front bumper in front of my trans cooler. I figured that's where I'd be getting the coolest air

duh

iTrader: (16)

I just extended the wires as well. Seems to work just fine.

WS Sick

I think I would put it before the MAF, don't want any chance of a sizeable leak after the MAF.