Fan Switch Mod
oh this is simple
I did it a couple days ago.
-Take out your pcm and find "RED"
-Find wire # 10
-splice into it.
-Run a wire to your switch
-Run a good ground to your switch
-turn on ignition
-hit the switch
Enjoy.
Its really that simple Ill send you pics of my set up if you want.
I did it a couple days ago.
-Take out your pcm and find "RED"
-Find wire # 10
-splice into it.
-Run a wire to your switch
-Run a good ground to your switch
-turn on ignition
-hit the switch
Enjoy.
Its really that simple Ill send you pics of my set up if you want.
Trending Topics
Those same wires are also located in a weather pack connector on top of the passenger side wheelhouse where they connect to the forward lighting harness and run to the relay box.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
I followed the instructions on fbody.com, except I routed my hot wire all the way through my amp/subs power line up to the battery.
I'd highly recommend an LED light with this as well, as it seems easy to leave it on when you get out of the car
ask me how I know!
I'd highly recommend an LED light with this as well, as it seems easy to leave it on when you get out of the car
ask me how I know! 
TECH Addict
iTrader: (75)
Joined: Aug 2005
Posts: 2,167
Likes: 1
From: South Jersey (15 miles from Atlantic City)
IM really big on doing free mods or mods that cost little money. I looked into this and i just figured ill drive up to SLP and got their fan switch installed it in about 30 min. Good Luck!
