LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Which electric water pump?

Old Oct 21, 2005 | 07:21 AM
  #1  
fastlt1's Avatar
Thread Starter
12 Second Club
20 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: Sep 2005
Posts: 1,512
Likes: 20
Default Which electric water pump?

Which electric water pump would you get for a daily driver and has a good price? Thanks.
Reply
Old Oct 21, 2005 | 07:47 AM
  #2  
Chris 96 WS6's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: May 2002
Posts: 385
Likes: 0
From: Nashville, TN
Default

CSI, its cheaper than the Mezeire, has better reliability, and you don't have to clearance the fans.
Reply
Old Oct 21, 2005 | 07:58 AM
  #3  
fastlt1's Avatar
Thread Starter
12 Second Club
20 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: Sep 2005
Posts: 1,512
Likes: 20
Default

Where is the cheapest place to buy one?
Reply
Old Oct 21, 2005 | 08:38 AM
  #4  
brandboZ28's Avatar
TECH Enthusiast
iTrader: (2)
 
Joined: Jan 2003
Posts: 667
Likes: 3
From: Tallahassee Fl
Default

Originally Posted by fastlt1
Where is the cheapest place to buy one?
Summit. CSI has also changed to CSR btw.
Reply
Old Oct 21, 2005 | 09:18 AM
  #5  
dhdenney's Avatar
TECH Veteran
iTrader: (53)
 
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
Default

Another vote for CSR. I bought mine off Ebay, a user had already installed it into the housing. Saved some time and money that way. Fits nicely, no mods to the fans as he said.
Reply
Old Oct 21, 2005 | 09:18 AM
  #6  
BlckSnake's Avatar
Teching In
 
Joined: Jun 2005
Posts: 27
Likes: 0
Default

so if you buy the mez water pump does something have to be modded to make it work, and the csi one bolt right up
Reply
Old Oct 21, 2005 | 09:18 AM
  #7  
dhdenney's Avatar
TECH Veteran
iTrader: (53)
 
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
Default

Yeah you have to cut away part of the fan shroud on the Meziere. Bad news bears.
Reply
Old Oct 21, 2005 | 09:22 AM
  #8  
BlckSnake's Avatar
Teching In
 
Joined: Jun 2005
Posts: 27
Likes: 0
Default

so then csr is the way to go
Reply
Old Oct 21, 2005 | 09:26 AM
  #9  
brandboZ28's Avatar
TECH Enthusiast
iTrader: (2)
 
Joined: Jan 2003
Posts: 667
Likes: 3
From: Tallahassee Fl
Default

There is some modifying the waterpump housing with the CSR. You have to clearance the housing some but its not too bad.
Reply
Old Oct 21, 2005 | 09:29 AM
  #10  
roughneck427's Avatar
TECH Enthusiast
20 Year Member
Photogenic
iTrader: (12)
 
Joined: Sep 2005
Posts: 521
Likes: 5
From: fresno ca
Default

just to let you know i bought a csr brand new and put it on my car and the impeller backed off they put right hand threads on the shaft when the pump is supposed to turn counter clockwise so when the engine heated the water up the impeller swelled up and backed off and blew my head gasket i called csr and said the shaft should have had loctite but it didnt if you decide to go with the csr i called meziere and they said thier impellers are pressed on im sending the csr back to summit and going with the meziere thats fine if i have to trim the shroud cheap isurance btw csr has a warranty disclaimer of any damage cause by thier product so im paying this all out of my pocket they should have cut left handed threads on the shaft bad design
Reply
Old Oct 21, 2005 | 09:34 AM
  #11  
fastlt1's Avatar
Thread Starter
12 Second Club
20 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: Sep 2005
Posts: 1,512
Likes: 20
Default

So if I get a csr put extra locktite on it. What about Summit's electric water pump?
Reply
Old Oct 21, 2005 | 09:44 AM
  #12  
roughneck427's Avatar
TECH Enthusiast
20 Year Member
Photogenic
iTrader: (12)
 
Joined: Sep 2005
Posts: 521
Likes: 5
From: fresno ca
Default

well i would just make sure the impeller is tight once mine backed off i put locktite on it and the seal started leaking because the ceramic seal has a spring to push it against the impeller and there was no way to hold the sahft from turning to tighten the impeller all the way without disassembling the motor and holding the shaft didnt want to void warranty or credit when i sent it back i also looked at the summit pump and they didnt knw who made it and couldnt tell me how the impeller was attached
Reply
Old Oct 21, 2005 | 10:56 AM
  #13  
stevemilz's Avatar
TECH Enthusiast
iTrader: (3)
 
Joined: Sep 2004
Posts: 672
Likes: 0
From: Michigan
Default

CSI/R Better cooling and more hp. Yeeeeeeeeee
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:13 AM.