ls1 torque vs lt1 torque
12-13-2006, 07:27 PM
#64
The LT1 has more low-end grunt, good on the streets for **** and git. The LS1's are good on the tracks cause of the ability to get up in rpms and get some good speed and times. It's just newer technology, the LT1 is outdated(even the LS1 is), but they can still kick some *** be it a mustang, or each other.
12-13-2006, 07:42 PM
#65
Staging Lane
iTrader: (4)
Join Date: Jul 2006
Location: AZ
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I think the LS1's have a better chance in the streets. At the track U only get a little over 100 mph, on the streets u get well over 100 mph where the say the LS1's take over ???
lol
12-14-2006, 12:49 AM
#72
What, all the stuff I got in it. This is a complete mod list:
4-BOLT MAIN LT1 CORVETTE BLOCK
LS1 AIR INTAKE WITH K&N AIR FILTER, GRANATELLI LID
DE-SCREENED MAF SENSOR
PORT-MATCHED AND POLISHED THROTTLE BODY WITH AIR FOIL
PORTED INTAKE MANIFOLD TO 55mm PORTS
HEADS MILLED .006 INCH, RESULTING IN 52.7cc CHAMBERS
HEADS AND INTAKE MANIFOLD PORT-MATCHED TO INTAKE GASKETS
FELPRO 1074 COMPETITION HEAD GASKETS
EAGLE 5130 FORGED CONNECTING RODS
SPEED-PRO FORGED ALUMINUM PISTONS
ROTATING ASSEMBLEY COMPLETELY BALANCED
CLEVITE 77 ENGINE BEARINGS
MELLING OIL PUMP WITH SOLID INPUT SHAFT
LT4 EXTREME DUTY FULL ROLLER TIMING CHAIN
LT4 HOT CAM KIT:
-LT4 HOTCAM SPECS: 218/228 DURATION, .525/.525 LIFT, 112LSA
-1.6 RATIO LT4 FULL ROLLER ROCKERS
-LT4 VALVE SPRINGS
PACESETTER RACING COATED LONG TUBE HEADERS
CUSTOM COMPUTER FULL RACE TUNING:
-ADJUSTED FUEL/AIR RATIO
-RAISED REDLINE TO 6500RPM AND ELIMINATED SPEED GOVERNOR
-ADJUSTED TIMING AND SHIFT POINTS, SHIFTS AT 6100RPM
-PROGRAMMED IN ELECTRONIC SHIFT KIT
THROTTLE BODY BYPASS
OIL BREATHER BYPASS
RE-DESIGNED COOLANT CROSSOVER LINE
34% UNDERDRIVE CRANK PULLEY
POLY-URETHANE TRANSMISSION MOUNT
LS1 ALUMINUM DRIVE SHAFT
AUBURN PRO-SERIES POSI-TRACTION DIFFERENTIAL
MOTIVE BEARING AND SHIM KIT FOR REAR AXLE
3.73:1 GM DIFFERENTIAL GEARS
LS1 BIG BRAKE UPGRADE
ALL SMOG PUMP PARTS REMOVED, ALL CONNECTIONS PLUGGED
EGR REMOVED AND BLOCKED, TUNED OUT OF COMPUTER
AC SYSTEM COMPLETELY REMOVED, FIRE WALL BLOCKED OFF KEEPING HEAT
1LE AC DELETE PULLEY BOLTED IN PLACE
EIBACH PRO SPRING KIT
SLP STRUT TOWER BAR
UPGRADED WHEELS AND TIRES
Let me know what you think now..
4-BOLT MAIN LT1 CORVETTE BLOCK
LS1 AIR INTAKE WITH K&N AIR FILTER, GRANATELLI LID
DE-SCREENED MAF SENSOR
PORT-MATCHED AND POLISHED THROTTLE BODY WITH AIR FOIL
PORTED INTAKE MANIFOLD TO 55mm PORTS
HEADS MILLED .006 INCH, RESULTING IN 52.7cc CHAMBERS
HEADS AND INTAKE MANIFOLD PORT-MATCHED TO INTAKE GASKETS
FELPRO 1074 COMPETITION HEAD GASKETS
EAGLE 5130 FORGED CONNECTING RODS
SPEED-PRO FORGED ALUMINUM PISTONS
ROTATING ASSEMBLEY COMPLETELY BALANCED
CLEVITE 77 ENGINE BEARINGS
MELLING OIL PUMP WITH SOLID INPUT SHAFT
LT4 EXTREME DUTY FULL ROLLER TIMING CHAIN
LT4 HOT CAM KIT:
-LT4 HOTCAM SPECS: 218/228 DURATION, .525/.525 LIFT, 112LSA
-1.6 RATIO LT4 FULL ROLLER ROCKERS
-LT4 VALVE SPRINGS
PACESETTER RACING COATED LONG TUBE HEADERS
CUSTOM COMPUTER FULL RACE TUNING:
-ADJUSTED FUEL/AIR RATIO
-RAISED REDLINE TO 6500RPM AND ELIMINATED SPEED GOVERNOR
-ADJUSTED TIMING AND SHIFT POINTS, SHIFTS AT 6100RPM
-PROGRAMMED IN ELECTRONIC SHIFT KIT
THROTTLE BODY BYPASS
OIL BREATHER BYPASS
RE-DESIGNED COOLANT CROSSOVER LINE
34% UNDERDRIVE CRANK PULLEY
POLY-URETHANE TRANSMISSION MOUNT
LS1 ALUMINUM DRIVE SHAFT
AUBURN PRO-SERIES POSI-TRACTION DIFFERENTIAL
MOTIVE BEARING AND SHIM KIT FOR REAR AXLE
3.73:1 GM DIFFERENTIAL GEARS
LS1 BIG BRAKE UPGRADE
ALL SMOG PUMP PARTS REMOVED, ALL CONNECTIONS PLUGGED
EGR REMOVED AND BLOCKED, TUNED OUT OF COMPUTER
AC SYSTEM COMPLETELY REMOVED, FIRE WALL BLOCKED OFF KEEPING HEAT
1LE AC DELETE PULLEY BOLTED IN PLACE
EIBACH PRO SPRING KIT
SLP STRUT TOWER BAR
UPGRADED WHEELS AND TIRES
Let me know what you think now..
WOAH
12-15-2006, 10:28 AM
#76
TECH Fanatic
Join Date: Jan 2004
Location: Kingfisher Oklahoma
Posts: 1,157
Likes: 0
Received 0 Likes
on
0 Posts
The LS1 makes more torque than an LT1, the LT1 just peaks its torque sooner, so at any given RPM the torque between the two will be missmatched.
The Reason the LT1 peaks so soon on torque is because of head flow plain and simple, heck you put a set of ported heads on a stock LT1 and it would perform like a stock LS1.
When you look at the LS1 head cc numbers it is deceiving because the runners IN the head are shorter than on an LT1, so the 170 CC LT1 compared to the 200CC LS1 is rediculous, it would be like the LT1s stock 170 CCs compared to a 210 CC LT1 head.
The Reason the LT1 peaks so soon on torque is because of head flow plain and simple, heck you put a set of ported heads on a stock LT1 and it would perform like a stock LS1.
When you look at the LS1 head cc numbers it is deceiving because the runners IN the head are shorter than on an LT1, so the 170 CC LT1 compared to the 200CC LS1 is rediculous, it would be like the LT1s stock 170 CCs compared to a 210 CC LT1 head.
12-15-2006, 09:16 PM
#80
Originally Posted by the_merv
What, all the stuff I got in it. This is a complete mod list:
4-BOLT MAIN LT1 CORVETTE BLOCK
LS1 AIR INTAKE WITH K&N AIR FILTER, GRANATELLI LID
DE-SCREENED MAF SENSOR
PORT-MATCHED AND POLISHED THROTTLE BODY WITH AIR FOIL
PORTED INTAKE MANIFOLD TO 55mm PORTS
HEADS MILLED .006 INCH, RESULTING IN 52.7cc CHAMBERS
HEADS AND INTAKE MANIFOLD PORT-MATCHED TO INTAKE GASKETS
FELPRO 1074 COMPETITION HEAD GASKETS
EAGLE 5130 FORGED CONNECTING RODS
SPEED-PRO FORGED ALUMINUM PISTONS
ROTATING ASSEMBLEY COMPLETELY BALANCED
CLEVITE 77 ENGINE BEARINGS
MELLING OIL PUMP WITH SOLID INPUT SHAFT
LT4 EXTREME DUTY FULL ROLLER TIMING CHAIN
LT4 HOT CAM KIT:
-LT4 HOTCAM SPECS: 218/228 DURATION, .525/.525 LIFT, 112LSA
-1.6 RATIO LT4 FULL ROLLER ROCKERS
-LT4 VALVE SPRINGS
PACESETTER RACING COATED LONG TUBE HEADERS
CUSTOM COMPUTER FULL RACE TUNING:
-ADJUSTED FUEL/AIR RATIO
-RAISED REDLINE TO 6500RPM AND ELIMINATED SPEED GOVERNOR
-ADJUSTED TIMING AND SHIFT POINTS, SHIFTS AT 6100RPM
-PROGRAMMED IN ELECTRONIC SHIFT KIT
THROTTLE BODY BYPASS
OIL BREATHER BYPASS
RE-DESIGNED COOLANT CROSSOVER LINE
34% UNDERDRIVE CRANK PULLEY
POLY-URETHANE TRANSMISSION MOUNT
LS1 ALUMINUM DRIVE SHAFT
AUBURN PRO-SERIES POSI-TRACTION DIFFERENTIAL
MOTIVE BEARING AND SHIM KIT FOR REAR AXLE
3.73:1 GM DIFFERENTIAL GEARS
LS1 BIG BRAKE UPGRADE
ALL SMOG PUMP PARTS REMOVED, ALL CONNECTIONS PLUGGED
EGR REMOVED AND BLOCKED, TUNED OUT OF COMPUTER
AC SYSTEM COMPLETELY REMOVED, FIRE WALL BLOCKED OFF KEEPING HEAT
1LE AC DELETE PULLEY BOLTED IN PLACE
EIBACH PRO SPRING KIT
SLP STRUT TOWER BAR
UPGRADED WHEELS AND TIRES
Let me know what you think now..
4-BOLT MAIN LT1 CORVETTE BLOCK
LS1 AIR INTAKE WITH K&N AIR FILTER, GRANATELLI LID
DE-SCREENED MAF SENSOR
PORT-MATCHED AND POLISHED THROTTLE BODY WITH AIR FOIL
PORTED INTAKE MANIFOLD TO 55mm PORTS
HEADS MILLED .006 INCH, RESULTING IN 52.7cc CHAMBERS
HEADS AND INTAKE MANIFOLD PORT-MATCHED TO INTAKE GASKETS
FELPRO 1074 COMPETITION HEAD GASKETS
EAGLE 5130 FORGED CONNECTING RODS
SPEED-PRO FORGED ALUMINUM PISTONS
ROTATING ASSEMBLEY COMPLETELY BALANCED
CLEVITE 77 ENGINE BEARINGS
MELLING OIL PUMP WITH SOLID INPUT SHAFT
LT4 EXTREME DUTY FULL ROLLER TIMING CHAIN
LT4 HOT CAM KIT:
-LT4 HOTCAM SPECS: 218/228 DURATION, .525/.525 LIFT, 112LSA
-1.6 RATIO LT4 FULL ROLLER ROCKERS
-LT4 VALVE SPRINGS
PACESETTER RACING COATED LONG TUBE HEADERS
CUSTOM COMPUTER FULL RACE TUNING:
-ADJUSTED FUEL/AIR RATIO
-RAISED REDLINE TO 6500RPM AND ELIMINATED SPEED GOVERNOR
-ADJUSTED TIMING AND SHIFT POINTS, SHIFTS AT 6100RPM
-PROGRAMMED IN ELECTRONIC SHIFT KIT
THROTTLE BODY BYPASS
OIL BREATHER BYPASS
RE-DESIGNED COOLANT CROSSOVER LINE
34% UNDERDRIVE CRANK PULLEY
POLY-URETHANE TRANSMISSION MOUNT
LS1 ALUMINUM DRIVE SHAFT
AUBURN PRO-SERIES POSI-TRACTION DIFFERENTIAL
MOTIVE BEARING AND SHIM KIT FOR REAR AXLE
3.73:1 GM DIFFERENTIAL GEARS
LS1 BIG BRAKE UPGRADE
ALL SMOG PUMP PARTS REMOVED, ALL CONNECTIONS PLUGGED
EGR REMOVED AND BLOCKED, TUNED OUT OF COMPUTER
AC SYSTEM COMPLETELY REMOVED, FIRE WALL BLOCKED OFF KEEPING HEAT
1LE AC DELETE PULLEY BOLTED IN PLACE
EIBACH PRO SPRING KIT
SLP STRUT TOWER BAR
UPGRADED WHEELS AND TIRES
Let me know what you think now..
Even a small 2800 would make a big difference in your car