Hot cam kit guys in here
#41
My 94 Z A4 has a hot cam with LT4 heads and headers. It put down 315 to the tire with a very very mild PCM4Less tune. It runs 13.2's with a 2800 converter and stock tires/gearing. I love the idle, sounds mint. I think the car could go alot better with a more aggresive tune.
#43
Launching!
iTrader: (1)
Join Date: Mar 2006
Location: texas
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
I can almost smell that caprice dude sh..ing on his self over us who actually like the hot cam.Usually he jumps all over the hot cam lovers.For some of us who are on a tight budget you cant beat the package.
#45
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: St John In
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Ok. I'm going with the hot cam kit. I will port the stock heads. gasket match the intake. Install long tubes.(already have a cat back and cai). Get a tune. Install a vig 3200 converter. IT has 3.23s and suspesion work. What will it run on motor? And with a 150 shot? Ballpark it.
#47
TECH Enthusiast
iTrader: (5)
Join Date: May 2004
Location: Tacoma, WA
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slamm69
I can almost smell that caprice dude sh..ing on his self over us who actually like the hot cam.Usually he jumps all over the hot cam lovers.For some of us who are on a tight budget you cant beat the package.
Here ya go, just got home from the dyno. My stupid hotcammed LT1 just put down 339.1 hp at the wheels blowing through the stock exhaust manifolds.
*edit* This was done on an eddy current dyno as well.
Last edited by Compstall; 02-24-2007 at 05:51 PM.
#49
Banned
iTrader: (3)
Join Date: Mar 2006
Location: Upstate NY
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01LS6SS
My 94 Z A4 has a hot cam with LT4 heads and headers. It put down 315 to the tire with a very very mild PCM4Less tune. It runs 13.2's with a 2800 converter and stock tires/gearing. I love the idle, sounds mint. I think the car could go alot better with a more aggresive tune.
What are your 60 foots?
Even with a mild tune and a decent 60 ft, say around 1.85- 2.05, you should be in the 12's.
#50
TECH Enthusiast
iTrader: (5)
Join Date: May 2004
Location: Tacoma, WA
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by the_merv
That's higher than most without LT's or any Headers.. what else do you have?
CSI water pump
Borla y-pipe
Flowbastard exhaust
March pullies
Lingenfelter CAI
Granatelli MAF
Speed Secrets tune
That's 'bout it for the power dept.
Oh yeah, for those naysayers that the Granatelli ain't worth nothin', I swapped it today in between runs. Gained 7 rwhp. Torque did move around a bit in the rpm range but not enough to write home about. Yes, I still think $330 for a new Granatelli MAF is too much, but a used one for ~$150 makes it a decent gain for the money.
#52
Launching!
iTrader: (1)
Join Date: Mar 2006
Location: texas
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
I cant remember who but someone slammed down 380rwhp with the hot cam and an Ed Wright tune.He posts on here quite often maybe he will chim in.I know, I know, 380 with the hot cam ,theres no way, but Ed Wright does a hell of a tune.I still say you cant beat the price for the package deal.Hot cam,longtubes,cai,3"cat back,tune,4.10's,dr's,150 shot,and you have yourself an high 11 second car or lower with a basically stock block and not a whole lot of the ol'ladies shoe money.LONG LIVE THE GENERAL.
#53
Originally Posted by slamm69
I can almost smell that caprice dude sh..ing on his self over us who actually like the hot cam.Usually he jumps all over the hot cam lovers.For some of us who are on a tight budget you cant beat the package.
You might want to STFU that guy has a car a hell of a lot heavier than yours running good numbers. I myself have talked to him PM about some stuff on LT1's and HE is VERY knowledgable. He doesn't hate the HOT cam just everything has its place depending on your goals. Someone here has a sig Cheap,Reliable,Fast... Pick 2. Learn it....... A Hot cam is a good(cheap) reliable contender but there are better cams.
#56
Launching!
iTrader: (1)
Join Date: Mar 2006
Location: texas
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by The stunningman
You might want to STFU that guy has a car a hell of a lot heavier than yours running good numbers. I myself have talked to him PM about some stuff on LT1's and HE is VERY knowledgable. He doesn't hate the HOT cam just everything has its place depending on your goals. Someone here has a sig Cheap,Reliable,Fast... Pick 2. Learn it....... A Hot cam is a good(cheap) reliable contender but there are better cams.
#59
Teching In
Join Date: Nov 2006
Location: Broken Arrow OK
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Droopy8503
does anybody have any sound clips of the hotcam?