gunnin' for 11's
Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: Feb 2007
Posts: 678
Likes: 0
From: schenectady, ny
gunnin' for 11's this year i would love to hit the 11's but i want the car to look at stock as possible, even trying to keep salad shooters. my setup is a 383 with lt4 hotcam, isky 600 lift springs, 1.6rrs. ported and polished heads, not 100 %.i also have a built 4l60e with a 2800 stall in the back. the car seems so much faster but i dont know. i dont really have the equipment to hook.
let me know guys
thanks
paul lafreniere
let me know guys
thanks
paul lafreniere
TECH Apprentice
Joined: Mar 2006
Posts: 326
Likes: 0
Originally Posted by plaf713
this year i would love to hit the 11's but i want the car to look at stock as possible, even trying to keep salad shooters. my setup is a 383 with lt4 hotcam, isky 600 lift springs, 1.6rrs. ported and polished heads, not 100 %.i also have a built 4l60e with a 2800 stall in the back. the car seems so much faster but i dont know. i dont really have the equipment to hook.
let me know guys
thanks
paul lafreniere
let me know guys
thanks
paul lafreniere
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: Feb 2007
Posts: 678
Likes: 0
From: schenectady, ny
i honestly dont care what numbers i put down, i just want to run 11's. if i put down 100 rwhp and runs 11s ill be happy, ill just stay away from the dyno days with my friends
Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: Feb 2007
Posts: 678
Likes: 0
From: schenectady, ny
well i already have the valvetrain for a bigger cam so if i wanted to i could easily just swap the cam for a bigger one. if i did go for a cc306 or a bigger cam like such, would you need different pushrods?