RHS solid roller 383 progress *PICS*
RHS solid roller 383 progress *PICS* We rollin' now 
engine is assembled, got lots of little stuff left to do, notch the passenger valvecover for the alternator, get a throttle cable on it etc etc..but we gettin CLOSE now!!
[IMG]
[/IMG]
The hood, got the ram air box to..hope it clears gonna be close.
[IMG]
[/IMG]
David
engine is assembled, got lots of little stuff left to do, notch the passenger valvecover for the alternator, get a throttle cable on it etc etc..but we gettin CLOSE now!![IMG]
[/IMG] The hood, got the ram air box to..hope it clears gonna be close.
[IMG]
[/IMG] David
Originally Posted by ridethesmallbus1
damn that is gonna be nice, your pockets gotta be alot lighter now
hope it fits
hope it fits
My wallet looks like a steamroller ran over it LMAO
I gonna have me some fun when it's done I know that!!David
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Tony Shepherd
Lookin good! Welcome to the single-plane intake family. 
Thank ya Mr "T"...glad to be a part of the family......hope mine runs good with no problems.
Cam specs
254/254@.050
672/643
Intake CL 106
LSA 108.
David
Originally Posted by 94 guy
fastfatboy, are the heads out of the box or ported? do you know anyone else running them?
Heads were ported by Lloyd Elliot.
As far as anyone running them, do you mean in the LT1 world? AggieZ28 on this board HAD a 396 with these heads on it, don't know if it ever ran or not.
As far as a regular small block Chevy.....they make pretty decent power.
I hope like hell mine does
David
Originally Posted by 94strokedz
Looks awesome man!! Good luck with the hood. I'm thinking it will clear, but you'll probably have to modify your cowl to fit the elbow. Looks wicked!!!
Yeh I have studied Turbo6's car on here and CZ28.com, very similar to mine. I am hoping it will clear, I waiting to hear back from him on some measurements from his car.
Oh yeh, THANKS!
David
Originally Posted by WYD-01
David, r u running a stock pcm?
Is that Clydes old car?
Is this your first set up from when you dropped a valve a while back?
Is that Clydes old car?
Is this your first set up from when you dropped a valve a while back?
Yes stock pcm, Robert Vance has Clydes old car. Same car I always had.
This is a different setup from the dropped valve "incident" LOL.
I had a 355, stock ported heads, small cam after I grenaded the first engine with the dropped valve. Ran good to, 89.5 mph in the 1/8 mile at Holt.
BTW who is this?
David
Originally Posted by -PEPE-
Looks awesome brother! Is that a intakelbows.com elbow & a custom SuperVicE?
Can't wait to get my SVE & elbow, gonna be some badass lt1s out this summer.
Can't wait to get my SVE & elbow, gonna be some badass lt1s out this summer.
Brett, It is a Super Vic intake, not an "e", and yes and Intakeelbows.com elbow.
THANKS, if it runs as good as it looks, I gonna have some fun!
David
