Stroker396@APF

iTrader: (18)

[/QUOTE]
ETP. Those are the ET Performance LS7 heads designed for the 4.0 bore. Expensive heads but when matched with a LS7 intake and 90MM TB it should out flow any other head/intake combo for the 416 L92 shortblock. [/QUOTE]


As the Saying Goes "I beg to Differ" The correct statement would be it should outflow any other 16 valve head/intake combo

I should have Dyno numbers in a couple of weeks, so I am not going to open a big can o worms about it right now

the_merv

iTrader: (88)

I am happy with the Factory L92 Heads on my 402 setup..can't beat 'em for the price.
When it's all done it should walk a C6 Z06 as well. I can see that guy now..."was that a LT1? "

darrensls1

We'll see. I have read a few threads about your heads and I curiously await results. But for now I'll revise the statement to say the best "tried and proven" head/intake combo on a LSX motor.

darrensls1

L92's are definately the best bang for the buck out there for a 400+ CI LSX motor. Confused is an understatement

They'll be like "I just got raped by a LT1 that sounds like a LS1! WTF"

Stroker396@APF

iTrader: (18)

That's fair

I will likely be the first running LT1 with the 32V setup at the rate the other ones are going

I have seen the setup in person, sitting next to the factory LS7 race head. Both are beautiful. Things can't come fast enough, but all in due time I guess.

the_merv

iTrader: (88)

Yup, I have a couple of months to go still, just saving money and buying it all at once..

That_guy

iTrader: (1)

i also get some **** from some people, i even get it from this dude who says he has a cobra but it doesnt sound like a true v8.

97blkz

iTrader: (1)

I think a guy that runs 12.31 and claims he wins all his races is comical. I run 10.43 and lose races. Guess NY has slow cars?

the_merv

iTrader: (88)

You know how many people do that **** down here.. It pisses me off. I run into them and burn them down just to rub it in their face that they are fake..funny thing is that they even try to challenge me..
There is one that just moved in down the street, I can't wait to get my LS2 in, and go down there and see if I can get him to play..

That_guy

iTrader: (1)

Hehehehe ^^^^ well i hope when u get ur ls2 u dnt forget bout us lt1 guys BTW that dudes cobra sounds like a v6.

darrensls1

Sure you do

I don't win all my races but I do win most of them. I usually make 15 passes per visit and I average one loss every other visit. So I guess that means I win 29 out of 30

And thus far I am something like 6 and 0 vs. LT1's.

Which makes perfect sense. When you are fast (10's or quicker IMO) you're most likely lining up against other fast cars. Thus you'll win some and you'll lose some.

Only if you consider 7's in the quarter slow

Let me try and explain how NYIRP works. They use lane 1 for bikes and sleds. Lanes 2 and 3 are for street tire vehicles. Lanes 4 and 5 are for any street vehicles using slicks. Lanes 6 and 7 I believe are for Jr dragstrers and gambler races. The other lanes are for the big dogs. Most of them are IHRA licensed, full cage, 9's or quicker, well I think you get the idea.

Right now I race in lanes 2 and 3 since M/T street radials are DOT approved. That means I race all the other brand X street cars on street tires/drag radials. You get everything in these lanes from mini-vans, pickup trucks, Mustang GT's, F-bodies, Vettes, Civics, ect. Now you would think some of these cars would be fast. But 95% are mid 13's or slower. 4% are low 12's-low 13's. And maybe 1% run in the 11's.

Now look at my vehicle. Stalled auto + M/T tires = very consistent. I run 12.3 - 12.5 on 99% of my runs. I also cut .500-.650 lights on 99% of my runs. When you consider all that I have posted here it should be pretty obvious as to why I win 29 out of 30 races.

But it does get very BORING. I want to lose some races or win by a fender sometimes. That's why I will get my IHRA license as soon as the new motor/N20 goes in. I want to race the single digit guys because many of them will be faster then me. I don't mind losing as much as I mind beating someone by 4+ car lengths race after race after race.

the_merv

iTrader: (88)

Yea, it's a V6.
Look what I am dropping the LS2 into.. I am representin all of us, if anyone asks it's a LT1..

97blkz

iTrader: (1)

We have reg tire lanes and slick/dr lanes. Local cars go 11's,10's 9's and 8's. We are talking street cars. Here's a link to a bunch of locals to me, I'm 40th on the list if that tells you anything. Drive to Bradenton and get in the slick/dr lane and get your *** whoppings regularly. Your 12.3 would have you at about 118'th, lol.

http://www.need2speed.com/vb_forums/timeslips.php?

TwoFast4Lv

iTrader: (8)

Just let me know when you are ready



I will sit at the end of the track waiting for my *** beating

the_merv

iTrader: (88)

TwoFast4Lv

iTrader: (8)

BTW Merv I COMPLETELY under stand why you are going. I would but I still have to much LTx stuff laying around not to

Mighty Whitey

so... how exactly is a 6.0L truck block, stroked to 402ci, an LS2?

it was my understanding that an LS2 was a 4.0" bore,all-aluminum gen4 motor: front mounted cam sensor, side mounted knock sensors higher tooth count crank sensor, etc.

and what "LS2" parts of the fuel injection system are you using that are not just LS1 stuff?

I ask this, because I just got done helping a friend with an iron 408/L92/L76 setup in his 2000 SS.
we still call it an LS1 here in kentucky...

the_merv

iTrader: (88)

I call it an "Iron LS2" cause it's the same factory specs as the Aluminum LS2. It makes it for some people out here to understand..some know what exactly I have, others are like "what's a 6.0, I thought they were 350's in trucks.."
I have the complete LS2 Fuel Injection, Rails & Injectors, all ontop of the L76.

Formula350

iTrader: (3)

I personally, would've gotten the 6.6 Block

the_merv

iTrader: (88)

Consider it a 6.6l.. with alot more potential..