385 LT1 installed w/ Video
#1
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Oct 2005
Location: NYC
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
385 LT1 installed w/ Video
Afetr 4 1/2 months of waiting my forged 385 LT1 is in the car. Sounds great and feels pretty strong. I got a tubular front suspension setup so the car is competely out of alignment to the point where i don't even want to take it to half throttle. Once I get the alignment I'll give you guys an update as to how its running and what the datalogs look like. Hopefully I can post a video up.
#6
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Oct 2005
Location: NYC
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
It's a 385 LT1
Bored .040 over
Block 0 dekced and squared
Internally balanced
-10CC forged JE pistons
6 inch Eagle H Beam Rods
Eagle Lightweight Pendulum Cut Crank
MLS gaskets, Gapless rings, heat treated bearings...etc
11:4.1 CR 8.79:1 DCR
Not too big of a cam 224/236 574/572 111 lsa
HI'll get a vid posted soon of how it sounds at idle. Gotta get home from work first. I'll keep updating this as time goes by.
Bored .040 over
Block 0 dekced and squared
Internally balanced
-10CC forged JE pistons
6 inch Eagle H Beam Rods
Eagle Lightweight Pendulum Cut Crank
MLS gaskets, Gapless rings, heat treated bearings...etc
11:4.1 CR 8.79:1 DCR
Not too big of a cam 224/236 574/572 111 lsa
HI'll get a vid posted soon of how it sounds at idle. Gotta get home from work first. I'll keep updating this as time goes by.
Trending Topics
#13
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Oct 2005
Location: NYC
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
motor work including all parts and assembly and dissasembly was about 3700. Instalation was done by my mechanic which was another 650. however, the car's been a money pit the 7 years I've had it. its an expensive hobby.
#14
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Oct 2005
Location: NYC
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
i took the car to get aligned and the guy couldn't do it fully. he was able to make the car better than it was before but not fully align it. i'll be taking it to a different shop sometime this week.
#16
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Oct 2005
Location: NYC
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
hey what you doing creeping around the lt1 section...i have to get the car aligned man. the shop i took it to today couldn't get the job done. going to take it to another place saturday. after that i'll tune it for daily driving and then take it to the dyno. the way things are going i'd say 3 weeks before its on the dyno.
#17
On The Tree
Join Date: Aug 2005
Location: Brooklyn, N.Y.
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
hey what you doing creeping around the lt1 section...i have to get the car aligned man. the shop i took it to today couldn't get the job done. going to take it to another place saturday. after that i'll tune it for daily driving and then take it to the dyno. the way things are going i'd say 3 weeks before its on the dyno.
#20
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Oct 2005
Location: NYC
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
I guess the guy wasn't skilled enough to do it. the car drives straight but the tires are facing inwards slightly. he was pretty honest about it. i'm taking it to this place my engine builder recommended this Saturday. hopefully they can do it. i'll take it there as soon as they open that way they can take their time with it.