Stick sizes; smaller than 6"(WS6 store)
03-09-2009, 12:43 PM
#1
Stick sizes; smaller than 6"(WS6 store) Currently I have a pro 5.0, ws6 short stick(6" model), with the c6 shift **** installed on my car. Two problems arise with this combination:
1) The ws6 short stick is not angled like the pro 5.0 stick leading to the shifter being too far to the passenger side.
2) The c6 shift **** is very tall so my shifter position still sits higher than I would like.
I would like to know whats the shortest available stick that is angled towards the driver? I know an angled 6" stick would be a bit smaller than the straight stick because of the angle.
Whats the actual length of the umi and lou's short stick? Are there sticks smaller than these that have an angle?
1) The ws6 short stick is not angled like the pro 5.0 stick leading to the shifter being too far to the passenger side.
2) The c6 shift **** is very tall so my shifter position still sits higher than I would like.
I would like to know whats the shortest available stick that is angled towards the driver? I know an angled 6" stick would be a bit smaller than the straight stick because of the angle.
Whats the actual length of the umi and lou's short stick? Are there sticks smaller than these that have an angle?
03-10-2009, 04:32 PM
#4
Hello,
Our short stick is 6.375" long and is angle towards the driver. We do however leave our threads extremely long... this allows users to cut up to 1" off the short stick and still use it but making it 1" shorter.
We them in stock for $19.99
Hope that helps!
Ryan
Our short stick is 6.375" long and is angle towards the driver. We do however leave our threads extremely long... this allows users to cut up to 1" off the short stick and still use it but making it 1" shorter.
We them in stock for $19.99
Hope that helps!
Ryan
03-10-2009, 06:05 PM
#6
Hello,
Our short stick is 6.375" long and is angle towards the driver. We do however leave our threads extremely long... this allows users to cut up to 1" off the short stick and still use it but making it 1" shorter.
We them in stock for $19.99
Hope that helps!
Ryan
Our short stick is 6.375" long and is angle towards the driver. We do however leave our threads extremely long... this allows users to cut up to 1" off the short stick and still use it but making it 1" shorter.
We them in stock for $19.99
Hope that helps!
Ryan
You just got yourself a sale!
Gonna cut it down about an 1" when i receive it!
03-12-2009, 09:46 PM
#8
On The Tree
Join Date: Jul 2008
Location: Arvada Colorado
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
