clutch ? on ls1
#1
Teching In
Thread Starter
Join Date: Jan 2006
Location: Hoffman Estates
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I lost my clutch again.I bought a used one from a guy.He told me if was out of a ls7.
I have a 01 Z28 with a t-56.
i lined it up with the flywheel when i got it home and the doll pins dont line up on the clutch.I called the guy back and he said get them pressed out of the flywheel" alot of people do it".After looking at the flywheel it seems to make sence but The pressure plate is deeper.
My ?'s
Will pressing the pins out **** me and send it outa wack?
Can I run a longer bolt with out screwing my self either?
Any suggestions gents would be greatly appreciated. Im im tired of jugglin this trans.
Christian
I have a 01 Z28 with a t-56.
i lined it up with the flywheel when i got it home and the doll pins dont line up on the clutch.I called the guy back and he said get them pressed out of the flywheel" alot of people do it".After looking at the flywheel it seems to make sence but The pressure plate is deeper.
My ?'s
Will pressing the pins out **** me and send it outa wack?
Can I run a longer bolt with out screwing my self either?
Any suggestions gents would be greatly appreciated. Im im tired of jugglin this trans.
Christian
#2
FormerVendor
iTrader: (38)
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I lost my clutch again.I bought a used one from a guy.He told me if was out of a ls7.
I have a 01 Z28 with a t-56.
i lined it up with the flywheel when i got it home and the doll pins dont line up on the clutch.I called the guy back and he said get them pressed out of the flywheel" alot of people do it".After looking at the flywheel it seems to make sence but The pressure plate is deeper.
My ?'s
Will pressing the pins out **** me and send it outa wack?
Can I run a longer bolt with out screwing my self either?
Any suggestions gents would be greatly appreciated. Im im tired of jugglin this trans.
Christian
I have a 01 Z28 with a t-56.
i lined it up with the flywheel when i got it home and the doll pins dont line up on the clutch.I called the guy back and he said get them pressed out of the flywheel" alot of people do it".After looking at the flywheel it seems to make sence but The pressure plate is deeper.
My ?'s
Will pressing the pins out **** me and send it outa wack?
Can I run a longer bolt with out screwing my self either?
Any suggestions gents would be greatly appreciated. Im im tired of jugglin this trans.
Christian
Yes, most people don't run teh dowel pins.
Not sure what you mean, "Pressure plate is deeper" though????
Not sure why you would need a longer bolt...what bolt are you talking about?
#6
Teching In
Thread Starter
Join Date: Jan 2006
Location: Hoffman Estates
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Heres the clutch.Sorry about the res.I just shot'em and put'em up.Is this a ls7 clutch
![](http://img524.imageshack.us/img524/7685/dsc0003zaw.th.jpg)
![](http://img524.imageshack.us/img524/6432/dsc0004lmb.th.jpg)
This is what im talking about.The plate doesnt sit right.There is space between the "basket" and the flywheel.These are the bolt from the bellhousing in.
![](http://img524.imageshack.us/img524/5334/dsc0001sxh.th.jpg)
The left one is my old bolts.They are to damn short to thread in.Can I run longer ones safley.
![](http://img524.imageshack.us/img524/7685/dsc0003zaw.th.jpg)
![](http://img524.imageshack.us/img524/6432/dsc0004lmb.th.jpg)
This is what im talking about.The plate doesnt sit right.There is space between the "basket" and the flywheel.These are the bolt from the bellhousing in.
![](http://img524.imageshack.us/img524/5334/dsc0001sxh.th.jpg)
The left one is my old bolts.They are to damn short to thread in.Can I run longer ones safley.
![](http://img524.imageshack.us/img524/5458/dsc0002u.th.jpg)
Last edited by zeus01; 08-27-2009 at 11:32 PM.
#7
FormerVendor
iTrader: (38)
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
First things first...what is up with your "basket" (also known as teh Pressure Plate)??? From teh looks of teh picture you included, is not anywhere CLOSE to sitting flush.
Can you get some different angles of it?
have you tried fitting the PP (pressure plate) on the flywheel, WITHOUT teh disc sandwiched between? What happens then? There is no reason for the PP to sit that high off the flywheel...
Can you get some different angles of it?
have you tried fitting the PP (pressure plate) on the flywheel, WITHOUT teh disc sandwiched between? What happens then? There is no reason for the PP to sit that high off the flywheel...
Trending Topics
#8
Teching In
Thread Starter
Join Date: Jan 2006
Location: Hoffman Estates
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I will get more pics up in the a few mins.
That was what i was concerned about.I have done 1 clutch prior to this(same car).It wasnt like that at all.I keep my old parts.the spec to the auto zone dont sit like this.
I thought maybee a diffrent style..................Dunno
was there a mistake in the sale
That was what i was concerned about.I have done 1 clutch prior to this(same car).It wasnt like that at all.I keep my old parts.the spec to the auto zone dont sit like this.
I thought maybee a diffrent style..................Dunno
was there a mistake in the sale
#9
Teching In
Thread Starter
Join Date: Jan 2006
Location: Hoffman Estates
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Sorry got caught on the phone for a while.
It looks like once the pins are removed WITHOUT the clutch plate it would sit flush.I do have a used spec stg 5 disc i could use but it was shot when my slave blew up and pissed fluid all over it.
![](http://img196.imageshack.us/img196/2894/dsc0010jrb.th.jpg)
![](http://img196.imageshack.us/img196/3098/dsc0008lwb.th.jpg)
![](http://img196.imageshack.us/img196/6271/dsc0007bek.th.jpg)
do I get ahold of this cat i got it from and let him know there was a mix up,whatcha think?
It looks like once the pins are removed WITHOUT the clutch plate it would sit flush.I do have a used spec stg 5 disc i could use but it was shot when my slave blew up and pissed fluid all over it.
![](http://img196.imageshack.us/img196/2894/dsc0010jrb.th.jpg)
![](http://img196.imageshack.us/img196/3098/dsc0008lwb.th.jpg)
![](http://img196.imageshack.us/img196/6271/dsc0007bek.th.jpg)
do I get ahold of this cat i got it from and let him know there was a mix up,whatcha think?
#10
FormerVendor
iTrader: (38)
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That is weird, I will say that. Are you saying that in teh LAST pictures just then, that you have NO disc and teh dowel pins are removed? WTF????
Only explanation is it is floating in mid air.![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Hate to do this, but can you get pics of the bottom pf teh PP? Disc? Flywheel? By themselves?
Having a hard time seeing what is going on, as I will also say that the image's are NOT very clear, and hard for me to see everything also, so....???
Only explanation is it is floating in mid air.
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Hate to do this, but can you get pics of the bottom pf teh PP? Disc? Flywheel? By themselves?
Having a hard time seeing what is going on, as I will also say that the image's are NOT very clear, and hard for me to see everything also, so....???
#13
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i would say around $250 from sponsors on here. more info for ya
http://kb.ls1gto.com/KB/article.aspx?id=10039
http://www.byunspeed.com/product_inf...oducts_id=4671
http://www.sdparts.com/product/12571...2Flywheel.aspx
http://kb.ls1gto.com/KB/article.aspx?id=10039
http://www.byunspeed.com/product_inf...oducts_id=4671
http://www.sdparts.com/product/12571...2Flywheel.aspx
#14
LS1TECH & Trucks Sponsor
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You can not use that clutch with your flywheel, you have to get the LS2/7 style flywheel. The mounting points are raised.
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic3451_2.gif)
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
![](https://ls1tech.com/forums/signaturepics/sigpic3451_2.gif)
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#15
Teching In
Thread Starter
Join Date: Jan 2006
Location: Hoffman Estates
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I wouldnt have bought it if i wouldve known that.I asked for a clutch for a ls1.The guy told me thats what it was.I asked him if it came with the flywheel he said no.He told me mine would work fine.Im just gonna sellit back to him.I still need a clutch for CHEAP!
#18
TECH Regular
iTrader: (3)
Join Date: Feb 2009
Location: Mooresville, Indiana
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well the clutch comes on a car with 505 factory ponies so yeah its a good clutch
i almost started crying when i read that your car has been down that long, what the hell have you been doing to yourself the last four years? sounds like a wierd case of self punishment
i almost started crying when i read that your car has been down that long, what the hell have you been doing to yourself the last four years? sounds like a wierd case of self punishment
#19
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i have 413whp and i dont see how anyone can speed shift or dog a car as much as i do and its still good after 40k miles. No clutch can beat it for the $$$$$. Just so you know they are self adjusting! The clutch will engage right off the floor at 1st but it will works its way up to the top of the pedal as it breaks in
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)