1LE trans mount
1LE trans mount I've done a search on this but I'm still confused. I got a 1LE tr mount from Beans for my 99SS. I decided not to put it on when I put the trans back in because it is totally different than the stocker: different bracket, stud and height. I currently have the ES w/nubs & no plate. The model # for the "1LE" bracket is 22201140. "Mount ASM" Is this the LT1 LE? Is it correct for 99SS M6. Pix, anyone?
Thanks!
Thanks!
Last edited by kingcuda70; Dec 13, 2003 at 10:52 AM.
I can't speak for the M6 because I had one on my A4 and took it off. The "1LE" mount GM now sells is a universal fit that is not model specific. It's taller than than the stock A4 mount to the point it pushes the tranny up higher into the tunnel and changed my pinion angle.
It can also alter the center of gravity and weight distribution to the rear tires to a degree. My poor 60-fts confirmed this. I changed just the mount went back to the track and got my 60 ft back.
It can also alter the center of gravity and weight distribution to the rear tires to a degree. My poor 60-fts confirmed this. I changed just the mount went back to the track and got my 60 ft back.
On The Tree
Joined: Nov 2002
Posts: 102
Likes: 0
From: Sachse, Texas
Crap...I just got this part and was waiting to put it on. Now it looks like I shouldn't use it. Everyone was so hot to trot on the 1LE mount I figured I would order one before they quite making it but the one I have it the same one as above....WTF? Should I still use it?
Thanks!
Thanks!
Trending Topics
On The Tree
Joined: Nov 2002
Posts: 102
Likes: 0
From: Sachse, Texas
Since it's raising the tranny, then technically couldn't you put some sort of high strength/durable washer between the tranny and mount to lower the tran? I would still really like to use this mount because the poly may be to noisy for me!!!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo not sure about that, but trust me u will get used to the noise, i dont even notice it now. once it breaks in a little its not as bad as when u first put it in and it definately bareable
On The Tree
Joined: Nov 2002
Posts: 102
Likes: 0
From: Sachse, Texas
I have a 1LE mount that I just got last Tuesday but haven't put it on yet. Saw this thread and now I'm worried about it, but I'm pretty sure I can get some sort of washer to use as a spacer. I saw the washer thing on another thread so I need to search around. I think we are all straight now! 
On The Tree
Joined: Nov 2002
Posts: 102
Likes: 0
From: Sachse, Texas
Found it! Here is what I was talking about! Really just the first link but there was another reference to it in the second...
https://ls1tech.com/forums//showthre...er+trans+mount
https://ls1tech.com/forums//showthre...er+trans+mount
https://ls1tech.com/forums//showthre...er+trans+mount
https://ls1tech.com/forums//showthre...er+trans+mount