Keisler clutchless 6 speed
#61
Staging Lane
Join Date: Jun 2010
Location: post falls, id
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
its jerico's own case design but formatted in a top loaded configuration simply for ease of maintenance. they also do 5 speeds. G-FORCE has some modded 6 speeds i do know that, cant remember pricing though.
#63
Staging Lane
Join Date: Jun 2010
Location: post falls, id
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
heres g-force's stuff
6-speed http://www.gforcetransmissions.com/tran_gt-56.asp
clutch-less 5 speed http://www.gforcetransmissions.com/tran_gf5r.asp
http://www.gforcetransmissions.com/tran_gsr.asp
6-speed http://www.gforcetransmissions.com/tran_gt-56.asp
clutch-less 5 speed http://www.gforcetransmissions.com/tran_gf5r.asp
http://www.gforcetransmissions.com/tran_gsr.asp
#64
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I emailed them never got a reply, 90 percent of the places i emailed either didnt build one strong enough or just simply dont reply to emails. I am in the military so I cant just pick up the phone.
#65
TECH Enthusiast
iTrader: (30)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have one of the last faceplated trans to come out of 6 speeds inc. before they closed down. They had a special going on and I opted to assemble myself. Cost for a viper output upgrade, replacement of 5&6 gearset with synchro assem, faceplate of my 1,2,3,&4 gears, bronze pads,ALL of the bearings,liberty slider assem. for 1-2 and 3-4, was about $1600+ shipping. I had to hone each faceplated gear myself for fit, install the bearings, and assemble the trans. They allowed me $100 for my output shaft as a trade in I think. Trans has about 10k on it now.
#66
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Rebuildable LS1 F-Body T56 Core: $1000
Level 3 EXTREME Viper T56 Rebuild: $1849
Cryotreatment: $350
REM Polishing: $250
Faceplating: $650
Shipping: $100
Grand total: $4199
Level 3 EXTREME Viper T56 Rebuild: $1849
Cryotreatment: $350
REM Polishing: $250
Faceplating: $650
Shipping: $100
Grand total: $4199
#67
11 Second Club
iTrader: (37)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Quick Time just did a recent G-Force 4sp swap in their fbody. I haven't heard any updates lately but the custom geared and V-gate shifted 4sp supposedly ran quite a bit quicker than the 6sp.
https://ls1tech.com/forums/drag-raci...peed-swap.html
Mike
https://ls1tech.com/forums/drag-raci...peed-swap.html
Mike
#68
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Is this a race car only thing? I mean yeah a 4 speed with a smaller case would be lighter, and who needs 6 gears at the track unless you have a really narrow power band
#69
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ya it's a race car thing, if I didn't enjoy the hell out of driving my car all over the place it would have a 4 spd trans, but I like to drive it on the hwy alot so the double overdrive stays for now.