Textralia / QuickTime Bellhousing Install Pics
#1
Textralia / QuickTime Bellhousing Install Pics
Just got wrapped up with my Textralia Z-grip, Quicktime Bellhousing, Tick Adj. MC install. Everything went together pretty smooth. Stock MC was a little tough to get out and lining up the trans took about 10 minutes, but with a lift and all the proper tools it was bearable. I've been rockin' the stock clutch for 3 years on my current H/C/I setup, so I haven't been driving it uber-hard, but now I'm set. Only put about 25 miles on it so far, but everything about this clutch is rockin' my socks. NO chatter or nothing. On to some pics...
This stocker is ugly as sin.
Stock bellhousing off.
This factory clutch was pretty beat down. There were burnt piles of dust and decay everywhere.
Old garbage slave. It's seen some work.
Puck yeah!!!
Flywheel up.
Test fit the QuickTime Bellhousing before the clutch goes in.
Motor plate went in fine too with no grinding anywhere. I had read some people had to grind the oil pan a little, but it was all good here.
Stock MC vs Tick Adjustable. The stocker was a BITCH to get out, so you can see we just bent the rod to get it out.
New slave and remote bleeder.
Everything bolted up. Awaiting the trans.
This stocker is ugly as sin.
Stock bellhousing off.
This factory clutch was pretty beat down. There were burnt piles of dust and decay everywhere.
Old garbage slave. It's seen some work.
Puck yeah!!!
Flywheel up.
Test fit the QuickTime Bellhousing before the clutch goes in.
Motor plate went in fine too with no grinding anywhere. I had read some people had to grind the oil pan a little, but it was all good here.
Stock MC vs Tick Adjustable. The stocker was a BITCH to get out, so you can see we just bent the rod to get it out.
New slave and remote bleeder.
Everything bolted up. Awaiting the trans.