Tick Performance Customers: We Want YOUR Car on OUR Website!
#1
Tick Performance Customers: We Want YOUR Car on OUR Website!
All past or present Tick Performance customers - in case you didn't know, we've got a massive new website in the works that we're scheduled to launch in early February. I'm at the graphic design part of the process, and what better graphics to use than those of our customers?
If you'd like pictures of YOUR car used on our website, please post them in this thread or PM them to me! (if you prefer email, mine is joey#tick-performance.com - replace the # with the @ sign)
Please include your first and last name, as well as what products/services of ours you've used/are using. They must be high resolution (the bigger the better, 300dpi is preferred) and they must look great! We'll pick our favorite ones to be used on our website and on our promotional material we've got planned for 2011.
This is your chance to get your car a ton of exposure! We appreciate your business and it's our pleasure to give back opportunities like these for you guys.
Thanks in advance!
If you'd like pictures of YOUR car used on our website, please post them in this thread or PM them to me! (if you prefer email, mine is joey#tick-performance.com - replace the # with the @ sign)
Please include your first and last name, as well as what products/services of ours you've used/are using. They must be high resolution (the bigger the better, 300dpi is preferred) and they must look great! We'll pick our favorite ones to be used on our website and on our promotional material we've got planned for 2011.
This is your chance to get your car a ton of exposure! We appreciate your business and it's our pleasure to give back opportunities like these for you guys.
Thanks in advance!
#3
blu, what kind of camera were those shot with? try using a higher ISO and slower shutter speed with a tripod to reduce the grainy look
I'll get some up soon if I can get my transmission back in tomorrow, here's a few older ones:
you're probably mostly looking for drag type cars/pictures but hey, why not!
PM me if you want more info/better resolution
I'll get some up soon if I can get my transmission back in tomorrow, here's a few older ones:
you're probably mostly looking for drag type cars/pictures but hey, why not!
PM me if you want more info/better resolution
Last edited by therealcreeper; 01-13-2011 at 08:36 PM.
Trending Topics
#19
Launching!
iTrader: (12)
Join Date: Nov 2007
Location: Liberty, Ohio
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Scott hank - 2000 SS M6 ....tick master cylinder, tick speed bleeder.....full BMR suspension with strano springs, 243's, MS3, LS6 intake, full SLP exhaust
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Last edited by mylittlez06; 04-07-2011 at 01:34 AM.
#20
Teching In
Join Date: Dec 2009
Location: Mooresville, NC
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Luke Turpin - 2002 Z28, with a full motor and trans build from this great group of guys, with special thanks to jonathon and joey for finding alot of the parts for me. Can't say enough about these guys for a great budget build!
The Hodge podge of parts is starting to run good too, 7.7's on my cinder block street tires, Looking for deep 7's with DR's and im sure ill be up too see you real soon for a new rear when mine
[IMG][/IMG]
[IMG][/IMG]
The Hodge podge of parts is starting to run good too, 7.7's on my cinder block street tires, Looking for deep 7's with DR's and im sure ill be up too see you real soon for a new rear when mine
[IMG][/IMG]
[IMG][/IMG]
Last edited by 64MonGooSe64; 04-06-2011 at 07:19 PM.