v8maro

iTrader: (4)

I dunno how to describe it that well... so here goes

all assuming the car is moving

When not in gear, clutch out, no sound

When in gear, clutch out, the trans/shifter area seems to whine/hiss, like the syncro is being activated or something? Like if you had the clutch out, and were forcing the shifter into gear. It's like on a cold day when it's hard to get into gear type sound

When in gear, clutch in under load, in gears 1, 3, 5 it does the sound

Any ideas???

v8maro

iTrader: (4)

Anyone?

Ashtongsr

Ever since I cut my shift boot to install my pro 5.0 shifter i've had that noise. I get it noticeably in 2nd and 4th.

v8maro

iTrader: (4)

So you think it's just normal tranny noise?

hourang

iTrader: (6)

started doing this when switching to the lou short stick from the stock broken one.

todds87ss

have you changed the fluid yet? might help

hourang

iTrader: (6)

yeah im hoping changing the fluid will fix all my woes.

black00TA

iTrader: (3)

mine does the same since i installed my pro5.0

StoleIt

iTrader: (3)

t t t! anybody had a problem with that. just put my pro 5.0 in today and have the same exact problem

SilverGhost

iTrader: (53)

i installed that shifter for stoleit and i have no f'n clue what that noise could be. i don't feel like taking the 10 minutes to take it all apart again and start rtv'ing everything lol.

anyone found the cause of this yet?

i have the pro 5.0 as well but if my car is doing it no way i'd notice it. you couldnt hear that noise in my car if it were 40 times louder even.

SilverGhost

iTrader: (53)

oh one more note. i did NOT cut the rubber shift boot as instructions say. there's really no need to do it so i did not. its not cut on my car either.

oramac68asf

i also have a pro 5.0 and same thing

black00TA

iTrader: (3)

i cut the boot, and i recommend you do the same, or call pro5.0 and ask them why.