Mcleod twin disc rebuild
08-14-2016, 11:46 AM
#1
Teching In
Thread Starter
iTrader: (11)
Join Date: May 2009
Location: Pittsburgh
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Mcleod twin disc rebuild Who can I get in touch with about getting my Clutch resurfaced/rebuilt?
I know it is a Mcleod twin disc but I am not exactly sure which model.
Got a used one in a sale and though it worked I'd like to get a quote on refurbishing it before I put it behind my turbo motor.
I know it is a Mcleod twin disc but I am not exactly sure which model.
Got a used one in a sale and though it worked I'd like to get a quote on refurbishing it before I put it behind my turbo motor.
08-15-2016, 09:19 PM
#5
it was under warranty so $0. The FW was slightly not true (flat) so they replaced it, discs & floater plate. My clutch only had a few hundred miles on it.
Several have had their Twins rebuilt at McLeod, email their tech for $
Several have had their Twins rebuilt at McLeod, email their tech for $
08-16-2016, 05:25 PM
#6
FormerVendor
Join Date: Dec 2008
Location: Anaheim, Ca
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Thank You for your support of McLeod Racing.
That is our 4400 series truck pull clutch.
We do offer a complete rebuild service, that will rebuild the pressure plate, replace both discs, replace the floater plate and re surface the flywheel.
If your interested in sending it in please fill out a RGA form located in the link below prior to shipping to us. Lead time is usually 5-7 Business days from the date received.
https://www.mcleodracing.com/content/submit-return/
Kind Regards,
That is our 4400 series truck pull clutch.
We do offer a complete rebuild service, that will rebuild the pressure plate, replace both discs, replace the floater plate and re surface the flywheel.
If your interested in sending it in please fill out a RGA form located in the link below prior to shipping to us. Lead time is usually 5-7 Business days from the date received.
https://www.mcleodracing.com/content/submit-return/
Kind Regards,
