What would it take
06-23-2004, 05:29 PM
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Jan 2004
Location: Palos Hills, IL
Posts: 3,321
Likes: 0
Received 0 Likes
on
0 Posts
What would it take i gotta A4....but want a manual trans....yeah i kno TC's liven it up....but im looking at it form this point
i wanna do wsomething while i drive!
well i want a 5 speed manual
can some1 tewll me what itll take...price and where to get one?
i wanna do wsomething while i drive!
well i want a 5 speed manual
can some1 tewll me what itll take...price and where to get one?
06-25-2004, 01:42 PM
#6
You may be able to price out a T56 swap kit from Billy Graham's Auto Salvage or Contemporary Corvette. It would be the trans, crossmember, bellhousing, clutch/brake/gas pedals, flywheel, clutch and pressure plate, and all the bolts. You'd need to fabricate wiring for the reverse lights and reverse lockout for sure, maybe extend the VSS wiring.
You'll need to saw a hole in your floorpan for the shifter, and cut holes in the firewall for the clutch master cylinder and bolts.
I paid $1200 for an LT1-car T56 swap kit complete as described above, about three years ago. This was for my 3rd gen Camaro so the swap process isn't exactly identical...but it was a pain on the old car, and will be a bigger pain on your newer one. I didn't have to futz with PCM software modification, running new wires to the PCM, etc...you will.
You'll need to saw a hole in your floorpan for the shifter, and cut holes in the firewall for the clutch master cylinder and bolts.
I paid $1200 for an LT1-car T56 swap kit complete as described above, about three years ago. This was for my 3rd gen Camaro so the swap process isn't exactly identical...but it was a pain on the old car, and will be a bigger pain on your newer one. I didn't have to futz with PCM software modification, running new wires to the PCM, etc...you will.
Trending Topics
06-28-2004, 08:12 AM
#8
12 Second Club
iTrader: (9)
Join Date: Dec 2003
Location: East Texas
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
He means that you'll have to do more work than him to swap, because you have more wiring issues with a newer car. I just finished the swap on my '01 and it's not that bad if you have basic mechanical and wiring knowledge. I swapped harnesses, trans, computer, and crossmembers with a '99 Firebird. It took about 36 hrs of work from start to finish. If you can find someone who wants to swap, go for it.
06-28-2004, 02:39 PM
#9
Teching In
Join Date: May 2004
Location: Chicago
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
did you already do the conversion I looked at your pictures on cardomain and am curious if you already did the conversion. If so I am very interested in knowing how everything went. I also live in the Chicagoland area too so any information would help.
06-28-2004, 11:17 PM
#10
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Jan 2004
Location: Palos Hills, IL
Posts: 3,321
Likes: 0
Received 0 Likes
on
0 Posts
nope havent done it yet...some of the mods have been done...still gotta auto looking into 5 or 6 speed stilll mayb itll just haveta wait