Has anyone tried Summit Pro Twin Clutch Kits
#122
10 Second Club
iTrader: (8)
The grown up here knows the difference in wtf he's talking about. The childish soy bois want to use a brake caliper for their hydraulic release bearing.
I call you names because that's what you act like. Where i come from there's consequences for acting like a dumbass. People like yall are the base of wtf is wrong with the internet and really society today.
That's ok tho i guess....yall probably be on fb where the bs is so thick even dumbasses like you look smart.
I call you names because that's what you act like. Where i come from there's consequences for acting like a dumbass. People like yall are the base of wtf is wrong with the internet and really society today.
That's ok tho i guess....yall probably be on fb where the bs is so thick even dumbasses like you look smart.
#123
9 Second Club
The grown up here knows the difference in wtf he's talking about. The childish soy bois want to use a brake caliper for their hydraulic release bearing.
I call you names because that's what you act like. Where i come from there's consequences for acting like a dumbass. People like yall are the base of wtf is wrong with the internet and really society today.
That's ok tho i guess....yall probably be on fb where the bs is so thick even dumbasses like you look smart.
I call you names because that's what you act like. Where i come from there's consequences for acting like a dumbass. People like yall are the base of wtf is wrong with the internet and really society today.
That's ok tho i guess....yall probably be on fb where the bs is so thick even dumbasses like you look smart.
When everyone is telling you you're being a bit silly and incorrect...perhaps it might be time to listen ? There's nothing wrong with being wrong when you just admit it. But when you continue to behave like a child....go stand in the corner.
#125
A brake caliper is a slave cylinder. Just no one calls them that. But everyone calls a clutch slave cylinder a slave cylinder regardless if it has a throw out bearing attached to it and only a moron would say your car doesn’t have one. The only manual cars that don’t have slave cylinders are those that are cable operated.
Even though no one calls a square a rectangle, a square most certainly is a rectangle.
Even though no one calls a square a rectangle, a square most certainly is a rectangle.
The following 3 users liked this post by Summitracing:
#128
10 Second Club
iTrader: (8)
Because that's the way it ******* works when you can't distinguish ******* parts you idiot.
they don't know anything about that **** man......but yet they think they're right about errythang.
Still waiting for pics or vids of someone making a brake caliper work for their hydraulic release bearing.
#130
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,259
Likes: 0
Received 1,692 Likes
on
1,213 Posts
This has gotten too out of control to be useful, so it's over.
The name calling is really over the top and not necessary. This isn't the SR&K section, so lets leave that behavior out of the tech areas. Please.
I'm not taking any sides on the initial disagreement, but I will share this life lesson: Sometimes there is a room full of people who disagree with you even when you're right. Name calling and aggression won't change their minds, it will only lower their opinion of you and make your information (no matter how right it may be) seem even less valuable, and the downward spiral will compound. If you keep it civil, factual and technical, you still may not change their minds (at least not that they admit to publicly), but you will invoke thought and might be able to open some minds to what you've presented.
The name calling is really over the top and not necessary. This isn't the SR&K section, so lets leave that behavior out of the tech areas. Please.
I'm not taking any sides on the initial disagreement, but I will share this life lesson: Sometimes there is a room full of people who disagree with you even when you're right. Name calling and aggression won't change their minds, it will only lower their opinion of you and make your information (no matter how right it may be) seem even less valuable, and the downward spiral will compound. If you keep it civil, factual and technical, you still may not change their minds (at least not that they admit to publicly), but you will invoke thought and might be able to open some minds to what you've presented.
The following 2 users liked this post by RPM WS6:
HioSSilver (01-03-2021), Kingc8r (05-30-2021)