Cheapest place for SPEC Stage III
#1
TECH Regular
Thread Starter
Join Date: Dec 2003
Location: Denton, TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Cheapest place for SPEC Stage III
Hey I need a SPEC stage III clutch and aluminum flywheel. Which sponsor has it cheapest right now? I also need the '01+ slave cylinder. Any help would be appreciated. Thanks!
#6
10 Second Club
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GuesDog
don't buy a spec, go with mcleod, exedy, ram anything but spec
I'm running SPEC and I'll continue to run SPEC.
I bet %75 of this forum runs SPEC, as well.
To the original poster, look up Tick Performance in Mount Airy, NC - they're small, but they have got some killer prices - tick-performance.com
#7
TECH Senior Member
iTrader: (60)
Originally Posted by 93octane
Wow that really sucks. That's the first time I've heard of anything like that.
Trending Topics
#8
Launching!
iTrader: (2)
Join Date: Aug 2005
Location: Socal
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Im pulling a spec clutch out of my car. I wasnt happy with it, it may need a rebalancing. Its the 2/3 hybrid, and I also have a mcleod adjustable cylinder for sale. I will let them go cheap. Interested?
#12
TECH Fanatic
iTrader: (1)
It's interesting that the guy whose Spec exploded told the story on Corvette Forum that his car was flooded out and that it wouldn't run for a month. Then the same day that he gets it running the clutch blows, coincidence? Spec most likely produces more clutches than any manufacturer, consequently there will be more failures. It seems to me that virtually every clutch manufacturer on this forum has had failures. The clutch is probably the most abused part on our cars. To me it's amazing more of them don't blow. The Mcleod scatter shield is a necessity IMO.
#13
Staging Lane
iTrader: (13)
Join Date: May 2004
Location: Pendleton, NY
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bigdsz
It's interesting that the guy whose Spec exploded told the story on Corvette Forum that his car was flooded out and that it wouldn't run for a month. Then the same day that he gets it running the clutch blows, coincidence? Spec most likely produces more clutches than any manufacturer, consequently there will be more failures. It seems to me that virtually every clutch manufacturer on this forum has had failures. The clutch is probably the most abused part on our cars. To me it's amazing more of them don't blow. The Mcleod scatter shield is a necessity IMO.
that flywheel and clutch were probably rusted over and all fucked up. And you only see people post problems, you never see the people post how great a clutch is because it works like its suppose to.
#18
TECH Senior Member
iTrader: (33)
fred beans, i got my disk, pp, pilot bearing for 324 shipped. i think the flywheels are about 188 shipped, or close to it. i got mine from a friend which he covered shipping on it. only other thing needed is a throwout bearing, so i would say 525 for the whole package shipped