Tranny fluid?
Tranny fluid? I am going to drain/refill my tranny fluid soon and i was wondering what to put back in it. Should i just use the stock ATF, go to a synthentic ATF, or get GM sycromesh?....Any input on these and opinions are appreciated!
Originally Posted by Six Speeds Inc.
Use 4 quarts of Mobil 1. That is what we have always ran in our units and even with a stock transmission seams to work well.
Amber
Amber
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Six Speeds Inc.
Use 4 quarts of Mobil 1. That is what we have always ran in our units and even with a stock transmission seams to work well.
Amber
Amber
The ATF correct? That is what I have been running, and it seems to be working good. -Mobile 1 ATF
Staging Lane
Joined: Apr 2004
Posts: 87
Likes: 0
From: STL
Originally Posted by Six Speeds Inc.
Use 4 quarts of Mobil 1. That is what we have always ran in our units and even with a stock transmission seams to work well.
Amber
Amber
I just did clutch and used mr transmission dextron 3. Not sure what it really is but it was cheap. And now just changed it out for penzoil synchromesh. It seems to be shifting better. Was a bit notchy with the no name dextron. Mobile 1 is also likely good after all sure six speed guys know a few things about t56. Likley be going with one of them next season possibly.
